LG 42LS4600 Quick Setup Guide
Network Quick Setup Guide
NETWORK SETTING
Wired Network Connection
P/NO: MBM63564012 (1210-REV02)
Please call LG Customer Service if you experience any problems.
Troubleshooting Network Problems
1
Press the
SETTINGS button to access the main menu.
2
Select the
NETWORK → Network Status menu.
NETWORK
Network Setting
Move
OK
Network Status
Follow the instructions below that correlate to your network status.
Check the TV or the router.
Network Status
TV
Gateway
DNS
Internet
When an
X
appears between TV and Gateway.
1
Check the cable connection between the TV and the wired router.
2
Reset the power for both the TV and the router/cable modem.
3
If you use a fixed IP address and choose to set the IP address automatically, an
X
will appear
between TV and Gateway.
4
If you are not using a router, consult your Internet service provider for service.
Check the router or consult your Internet service provider.
Network Status
TV
Gateway
DNS
Internet
When an
X
appears between Gateway and DNS.
1
Check the router/cable modem.
- Unplug the router/cable modem, then plug it back in after 5 seconds.
- Press the Reset button on the router/cable modem.
2
If you are not using a router, consult your Internet service provider.
Network Status
TV
Gateway
DNS
Internet
When an
X
appears between DNS and Internet.
1
Unplug the router/cable modem, then plug it back in after 5 seconds.
2
Press the Reset button on the router/cable modem.
3
Check that the MAC address of the TV/router is registered with your Internet service provider.
(The MAC address displayed on the right pane of the network status window should be
registered with your Internet service provider.)
4
Check the router manufacturer’s website to make sure your router has the latest firmware
version installed.
* Image shown may differ from your TV.
* Image shown on a PC or mobile phone may vary depending on the OS (Operating System).
1
Press the
SETTINGS button to access the main
menu.
2
Select the
NETWORK → Network Setting menu.
NETWORK
Network Setting
Move
OK
Network Status
3
Select the
Start Connection.
Connect a LAN cable to the back of TV.
Setting your network will enable network-related features on the TV.
Previous
Network Setting
Start Connection
4
The device automatically tries to connect to the
network.
network.
Previous
Network connecting...
Network Setting
Cancel
5 The connected network is displayed.
Select the
Complete to confirm the network
connection.
Network Setting
For detailed settings, select [Set Expert].
Previous
Wired network is connected.
Complete
Set Expert
Internet connection
Wired router