Omnitron iConverter GXTM 8939-0-D User Manual

Product codes
8939-0-D
Page of 4
ManageMent systeM
The  GX/TM  has  integrated  management,  eliminating  the 
cost and space required for external management hardware.  
The iConverter management system provides comprehensive 
remote configuration and performance monitoring. iConverter 
management  reduces  operational  expenditures  by  keeping 
truck  rolls  to  a  minimum  through  remote  provisioning,  trap 
notification and loopback capabilities. 
iConverter management is available out-of-band via IP-Less 
protocol using the 802.3ah OAM channel or Omnitron’s Secure 
OAM channel, or in-band using SNMP or Telnet.
Management is accessed via Omnitron’s NetOutlook® SNMP 
Network  Management  Software  with  an  intuitive  Graphical 
User Interface, or third party SNMP software.  Telnet and CLI 
management interfaces are also supported, and utilize an easy 
to use, menu-driven interface. The CLI interface is accessed 
via  a  Serial  Console  Port,  that  provides  local  configuration 
and allows  for firmware updates.  Additionally, the port can be 
connected to a serial modem to provide an alternative remote 
management path.  
IP-Based Management
The GX/TM can be managed through IP protocols, SNMPv1, 
SNMPv2c, SNMPv3 and Telnet. The IP address of the GX/
TM can be user-defined or resolved through the DHCP host 
on the network. The IP protocols for management access can 
be enabled or disabled individually or as a group. Access to 
the  management  is  protected  by  password  authentication. 
SMNPv3  strengthens  secure  access  to  devices  by  a 
combination of authenticating and encrypting packets over the 
network. Management VLAN can also be defined to separate 
management traffic from customer traffic.   
802.3ah and Secure OAM Management Channels
When utilizing a Remote OAM management channel (Secure 
IP-less  or  802.3ah),  the  NID  at  the  Customer  Premises  is 
securely managed by its fiber link partner located at the Central 
Office  or  Point  of  Presence.   The  management  network  IP 
address is not available to the customer network and is isolated 
by the iConverter Network Management Module (NMM) in the 
19- Module Chassis at the Central Office.
Page 3
speciFications
iConverter
 GX/TM
A  management  processor  on  the  GX/TM  in  the  19-Module 
Chassis  isolates  the  encrypted  management  data  from  the 
customer data and communicates with the NMM via a separate 
management backplane bus.  Management traffic on the user 
data lines is IP-less and carried on a securely encrypted data 
channel to protect the management from unauthorized access. 
The  chassis  at  the  Central  Office  requires  only  a  single  IP 
address  to  manage  itself  and  all  of  the  connected  remote 
chassis managed by the Remote OAM channel. This is the ideal 
configuration for networks that separate secure management 
traffic from the service (customer) traffic on different networks, 
or when management IP addresses are at a premium.
Description
10/100BASE-T UTP to 100BASE-FX
Fiber Media Converter
and Network Interface Device
Protocols
10BASE-T, 100BASE-TX, 100BASE-FX
with 1536 bytes max. frame size
UTP Cable
EIA/TIA 568A/B, Category 5 and higher
Fiber Cables
Multimode: 50/125, 62.5/125, 100/140µm
Single-mode: 9/125µm
Serial Cable
RS-232, 22 to 24 AWG, 12 to 50 pF/ft.
UTP Connector
RJ-45
Fiber Connectors
  SFP:
  Dual Fiber:
  Single-Fiber:
LC
SC, ST, LC, MT-RJ
SC
Serial Connector
Mini DIN-6 female,
mini DIN-6 male to DB-9 female adapter included
Controls
DIP-Switches and LEDs
DC Power
Plug-In Module: 1.0A @ 3.3VDC
Standalone: 8-15VDC,
0.6A @ 9VDC
DC Power Connector
Plug-In: Power supplied by backplane
Standalone: 2.5mm Barrel Connector or
Field-wireable Terminal Connector
AC Power Adapter
  [US]
Plug-In Module: N/A
Standalone: 100-120VAC/60Hz
0.07A @ 120VAC
AC Power Adapter
  [Universal]
Plug-In Module: N/A
Standalone: 100-240VAC/50-60Hz
0.07A @ 120VAC
Dimensions
Plug-In Module:  W:0.85" x D:4.5" x H:2.8"
Standalone: W:3.1" x D:4.8" x H:1.0"
Wallmount:  W:3.8" x D:4.8" x H:1.0"
Weight
without power adapter
Plug-In Module:  8oz.
Standalone:  1 lb.
Weight
with power adapter
Plug-In Module: N/A
Standalone: 1.5 lb.
Compliance
UL, CE, FCC Class A, MEF 9
IP-Based Management
Telnet; SNMPv1, SNMPv2c, SNMPv3
Temperature
Standard Operating:  0 to 50º C
Wide Operating:  -40 to 60º C
Storage:  -40 to 80º C
Humidity
5% to 95% (non-condensing)
Altitude
-100m to 4000m (Operational)
MTBF (Hours)
Plug-In Module: 600,000
Standalone without Power Adapter:  600,000
Standalone With Power Adapter: 250,000