LG HR836T Quick Setup Guide

A.  Connect one end of the RF cable to ANTENNA 

OUT (TO TV) jack on the unit and other end to 
ANTENNA IN jack on your TV.  Passes the signal 
from the ANTENNA IN jack to your TV/monitor. 

  Connect the Terrestrial TV antenna to the 

ANTENNA IN jack on the unit. If you want to 
use an indoor antenna, use one with a signal 
amplifier rated at 5V, 100mA and set [Antenna 
5V] to [ON] in the setup menu.

B.  Connect the HDMI jack on the unit to the HDMI 

jack on a HDMI compatible TV or monitor.

All available digital TV or radio programmes are 
searched for and stored automatically based on 
the selected country.
1.  Press HOME.
2.  Select [Setup] --> [DTV] --> [Auto Tuning] and 

press ENTER (b).

3.  Select [Start], and press ENTER (b) to begin 

the channel search. 

 

Scans digital TV or radio programmes and adds 
the detected programmes to the programme list.
1.  Display [Setup] menu.
2.  Select [DTV] --> [Manual Tuning] and press 

ENTER (b) to display the [Manual Tuning] 

menu.

 

3.  Use w/s/a/d to select the desired 

multiplexer (MUX), and the unit starts scanning 
automatically. 

4.  Use s to select the [Add] and press ENTER 

(b) to add the programme the unit scans 

automatically.

Quick Guide