Multi-link Polnet ACP 3 ACP3 Leaflet
Product codes
ACP3
How does the Polnet ACP work?
The ACP installs on an analog phone line and answers
inbound calls at the first sign of ring voltage. After the ACP
goes off‐hook, it immediately screens for fax and DTMF
transfer codes. During this processing period, a “ring back”
tone is issued to the calling party. Once a transfer
command is received, the call is routed to the
corresponding port. In the absence of fax/transfer codes,
the call is defaulted to device port #1. Outbound calls are
processed in the normal fashion with barge‐in protection.
Priority call over‐ride can allow a device on port #1 to
interrupt any transmission for critical outbound calls.
inbound calls at the first sign of ring voltage. After the ACP
goes off‐hook, it immediately screens for fax and DTMF
transfer codes. During this processing period, a “ring back”
tone is issued to the calling party. Once a transfer
command is received, the call is routed to the
corresponding port. In the absence of fax/transfer codes,
the call is defaulted to device port #1. Outbound calls are
processed in the normal fashion with barge‐in protection.
Priority call over‐ride can allow a device on port #1 to
interrupt any transmission for critical outbound calls.
Ask our technicians
Our staff of technicians is available to answer any
questions you may have about programming or
installation. We can even test and program your unit over
the phone! We are available before and after the sale to
ensure your satisfaction and optimal performance for your
application
questions you may have about programming or
installation. We can even test and program your unit over
the phone! We are available before and after the sale to
ensure your satisfaction and optimal performance for your
application
.
TOLL FREE: 800.535.4651
International: +1 859.885.6363
International: +1 859.885.6363
techsupport@multilink.net
sales@multilink.net
POLNET ACP TECHNICAL SPECIFICATIONS
Model Number ACP‐3; ACP‐5; ACP‐9
Input Power Requirements
At AC Transformer:
110‐125 Volts AC only, 50‐60 Hz
At Power Jack on ACP:
12‐15 Volts AC
Power Consumption:
10 Watts
Power Consumption at standby:
8 Watts
CO Interface
Ringer Equivalence Number:
1.1B
Input Ring Detection:
40‐150 Volts AC, 15‐68 Hz
Physical: 6.3" W x 9.5" D x 1.4" H, 1 lb
Device Interface
Battery:
45 Volts DC to all ports
Off‐Hook Detection:
8‐150 mA
Ring Generator Frequency:
33 Hz
Waveform:
Pseudo‐Sine
Ringing No Load:
Approximately 105 Volts AC
Ringing 8K Ohm Imp. (REN1.0):
Approx 76 Volts AC
Ringing 4K Ohm Imp. (REN2.0):
Approx 59 Volts AC
Ringing 2.7K Ohm Imp. (REN3.0):
Approx 45 Volts AC
Warranty 2 year limited
Multi‐Link, Inc.
122 Dewey Drive | Nicholasville, KY | 40356 USA
Sales and Tech Support 800.535.4651
FAX 859.885.6619
www.multi‐link.net
Copyright © Multi‐Link, Inc. 2009
Polnet® is a registered trademark of Multi‐Link, Inc.