Viewsonic PJD7333 User Manual
20
Operation
Powering On/Off the Projector
Powering On the Projector:
1. Complete the AC power cord and peripheral signal cable(s) connections.
2. Press
to turn on the projector.
The projector takes a minute or so to warm up.
3. Turn on your source (computer, notebook, DVD, etc.). The projector automatically
detects your source when Auto source setting is ON.
• If you are connecting multiple sources to the projector simultaneously, press
• If you are connecting multiple sources to the projector simultaneously, press
SOURCE on the projector to select your desired signal or press your desired
signal key on the remote control.
signal key on the remote control.
• If the projector doesn't detect a valid signal, the message 'No Signal' will con-
tinue to be displayed.
• Be sure the Quick Auto Search function in the SOURCE menu is On if you want
the projector to automatically search for the signals.
Warning
•
Remove the lens cap first before powering on.
•
Never look into the lens when the lamp is on. This can damage your eyes.
•
This focal point concentrates high temperature. Do not place any object near it to avoid
possible fire hazard.
Powering Off the Projector:
1. Press
to turn off the projector lamp. You will see a message "Power off? Press
Power again" appear on the screen.
2. Press
again to confirm.
• When green mode is turned off, the Power LED begins flashing and the projec-
tor has entered stand-by mode.
• When green mode is turned on, the Power LED becomes steady light and the
projector has entered stand-by mode.
• If you want to turn the projector back on, you must wait until the projector has
completed the cooling cycle and has entered stand-by mode. Once in stand-by
mode, simply press
mode, simply press
to restart the projector.
3. Disconnect the AC power cord from the electrical outlet and the projector.
4. Do not turn on the projector right after power off.
4. Do not turn on the projector right after power off.