Viewsonic PJD5234L User Manual
25
Switching input signal
The projector can be connected to multiple devices at the same time. However, it can only
display one full screen at a time.
display one full screen at a time.
Be sure the Quick Auto Search function in the SOURCE menu is On if you want the
projector to automatically search for the signals.
projector to automatically search for the signals.
You can also manually select the desired signal by
pressing one of the source selection keys on the
remote control, or cycle through the available input
signals.
pressing one of the source selection keys on the
remote control, or cycle through the available input
signals.
1.
Press SOURCE on the projector or remote
control. A source selection bar is displayed.
control. A source selection bar is displayed.
2.
Press
/
until your desired signal is
selected and press MODE/ENTER on the
projector or Enter on the remote control.
Once detected, the selected source information
will be displayed on the screen for seconds. If
there are multiple devices connected to the
projector, repeat steps 1-2 to search for another
signal.
projector or Enter on the remote control.
Once detected, the selected source information
will be displayed on the screen for seconds. If
there are multiple devices connected to the
projector, repeat steps 1-2 to search for another
signal.
•
The brightness level of the projected image will
change accordingly when you switch between
different input signals. Data (graphic) "PC"
presentations using mostly static images are
generally brighter than "Video" using mostly
moving images (movies).
change accordingly when you switch between
different input signals. Data (graphic) "PC"
presentations using mostly static images are
generally brighter than "Video" using mostly
moving images (movies).
•
The input signal type effects the options available
for the Color Mode. See
for the Color Mode. See
"Selecting a picture
mode" on page 31
for details.
•
Please see
"Projector specifications" on page 58
for the native display resolution of this projector.
For best display picture results, you should select
and use an input signal which outputs at this
resolution. Any other resolutions will be scaled by
the projector depending upon the 'aspect ratio'
setting, which may cause some image distortion
or loss of picture clarity. See
For best display picture results, you should select
and use an input signal which outputs at this
resolution. Any other resolutions will be scaled by
the projector depending upon the 'aspect ratio'
setting, which may cause some image distortion
or loss of picture clarity. See
"Selecting the aspect
ratio" on page 28
for details.
Changing HDMI input settings
This function is only available for the PJD5134/PJD5234L/PJD5533w series.
In the unlikely event that you connect the projector to a device (like a DVD or Blu-ray
player) via the projector’s HDMI input and the projected picture displays wrong colors,
please change the color space to an appropriate one that fits the color space setting of the
output device.
player) via the projector’s HDMI input and the projected picture displays wrong colors,
please change the color space to an appropriate one that fits the color space setting of the
output device.
To do this:
1.
Open the OSD menu and go to the SOURCE menu.
2.
Press
to
highlight
HDMI Format and press
/
to select a suitable color space
according to the color space setting of the output device connected.
•
RGB: Sets the color space as RGB.
D-Sub / Comp. 1
Video
S-Video
D-Sub / Comp. 2
PJD5132/PJD5232L
PJD5134/PJD5234L/PJD5533w
D-Sub / Comp. 1
Video
S-Video
D-Sub / Comp. 2
HDMI