Omnitron iConverter 10FL/T 8303-1 Leaflet
Product codes
8303-1
iConverter
iConverter
®
The
■
iConverter 10/FLT is an IEEE 802.3 compatible
10BASE-T UTP to 10BASE-FL fiber converter
Supports multimode, single-mode, and single-fiber with
■
ST, SC, LC and MT-RJ connectors
UTP port automatically supports Half or Full-Duplex
■
10Mbps Ethernet
UTP crossover switch eliminates the need for a
■
crossover cable
User-selectable link fault detection modes facilitate
■
quick fault detection, isolation and reporting
Management is available with the addition of a
■
management module to the chassis
SNMP management via
■
NetOutlook
®
provides real-
time port and module information, remote parameter
configuration and trap notification
Modules are hot-swappable in 19-Module, 5-Module,
■
2-Module or 1-Module chassis
LED displays for immediate visual status of each port
■
Lifetime Warranty and free 24/7 Technical Support
■
iConverter
10FL/T
10BASE-T to 10BASE-FL Managed Ethernet Media Converter
The iConverter 10FL/T managed media converters are
members of the modular iConverter product family, and provide
10BASE-T UTP to 10BASE-FL fiber conversion.
The iConverter 10FL/T models are available with multimode,
The iConverter 10FL/T models are available with multimode,
single-mode and single-fiber options. They support ST, SC,
LC and MT-RJ connectors. The UTP port supports 10BASE-T
in either Half or Full-Duplex mode. A UTP crossover switch
eliminates the need for a crossover cable and facilitates
connectivity to network equipment such as hubs, switches
and workstations.
The 10FL/T features user-selectable Link Propagate, Link
The 10FL/T features user-selectable Link Propagate, Link
Segment and Remote Fault Detection modes to facilitate quick
fault detection, isolation and reporting.
iConverter 10FL/T modules are hot-swappable and can be
iConverter 10FL/T modules are hot-swappable and can be
mounted in a 19-Module (2U high) or 5-Module (1U high) rack-
mountable chassis (19-inch or 23-inch) with any combination
of redundant AC, 24VDC or 48VDC power supplies. They
can also be mounted in a 2-Module AC or 18 to 60VDC
powered chassis, or in a 1-Module AC/DC powered chassis.
The iConverter Multi-Service Platform consists of Network
Interface Devices, T1/E1 multiplexers, CWDM multiplexers
and managed media converters that combine to deliver
Carrier Ethernet and TDM services over fiber or CWDM
wavelengths. This flexible architecture supports a wide variety
of configurations for scalable and reliable fiber connectivity in
Service Provider and Enterprise networks.
Key Features