Viewsonic PJD8653WS User Manual

Auto: When a HDMI1.4a 3D timing identification signal is detected, the 3D image

is selected automatically.

Choose “Off” to disable 3D function.

Choose “On” to enable 3D function.

The 3D display performance will depend on the 3D glasses you applied.

If the input signal is analog, the projector can not automatically identification signal to manually

switch to the “on”.

When “3D” is enabled, “Color Mode”, “Digital Zoom”, “Color Temp.”, “Dynamic Black” and “Interactive”

functions are not supported.

3D Invert

If you see a discrete or overlapping image while wearing DLP 3D glasses, you may

need to execute “Invert” to get best match of left/right image sequence to get the

correct image.

3D Format

Use this feature to select the 3D format. Options are: “Frame Packing”, “Side-by-Side

(Half)”, “Top and Bottom”, “Frame Sequential” and “Field Sequential”.

“Frame Sequential” is supported the DLP Link 3D input signals from VGA / HDMI connector.

“Frame Sequential” / “Field Sequential” are supported the HQFS 3D input signals from Composite/S-

video connector.

“Frame Packing” / “Side-by-Side(Half)” / “Top and Bottom” are supported from HDMI 1.4a 3D input

signals.

1080p @24

Use this feature to select 96 or 144Hz refresh rate as using 3D glasses in the1080p @

24 frame packing.

3D
3D Invert
3D Format
1080p@24

Off
Off

Select

Enter

Exit