Viewsonic PJD8653WS User Manual
50
Image has vertical flickering bar
`
Use “Clock” to make an adjustment. Refer to the “Screen” section for more
information.
`
Check and reconfigure the display mode of your graphic card to make it
compatible with the product.
Image is out of focus
`
Adjust the “Focus Ring” on the projector lens.
`
Make sure the projection screen is within the required distance. Refer to
Pages 17-18.
The image is stretched when displaying 16:9 DVD title
When you play anamorphic DVD or 16:9 DVD, the projector will show the best
image in 16: 9 format on projector side.
`
If you play 4:3 format DVD title, please change the format as 4:3 in projector
OSD.
`
If the image is still stretched, you will also need to setup the display format
as 16:9 (wide) aspect ratio type on your DVD player.
Image is too small or too large
`
Move the projector closer to or further from the screen.
`
Press “Menu” on the remote control or on the control panel. Go to “Screen” -->
“Aspect Ratio”and try the different settings.
Image has slanted sides:
`
If possible, reposition the projector so that it is centered on the screen and
below the Bottom of the screen.
`
Use “Screen” --> “V Keystone” from the OSD to make an adjustment.
Image is reversed
`
Select “Screen” --> “Ceiling Mount” from the OSD and adjust the projection
direction.