Viewsonic CDE4302 User Manual

10

NOTE:  The control button described in this section 

is mainly on the remote control unless 

specified otherwise.

You can change the picture format to suit the video 

source. Each video source has its available picture 

formats.
The available picture formats depend on the video 

source:

1.  Press [ ]

 button.

2.  Press [ ] or [ ] button to choose a picture format, 

then press [

] button.

•  {

FULL}: Enlarge the picture to fill the screen.  

Recommended for minimal screen distor tion 

but not for 

 or 

.

•  {

Dynamic}: Scale 4:3 format to 16:9. Not 

recommended for 

 or 

.

•  {

Custom}: Shows wide screen format 

content unstretched. 

•  {

Real}: Provide maximum detail for 

. 

•  {

Normal}: Display the classic 4:3 format. 

This display can play music, movie, or photo files 

from your USB device.
1.  Connect your USB device to the USB port on 

this display.

USB

HDMI

HDMI

2.  Press [ ] 

button, select USB, then 

press [

] button.

3.  The connected USB device is detected 

automatically for all its playable files, which will 
be automatically sor ted into 3 types: 

Music  , 

Movie  , and Photo  .

4.  Press [ ] BACK button to go up to the top 

layer in the screen. Press [ ] [ ] button to 

choose the file type. Press [

] button to enter 

its play list. 

5.  Select the file you want. Press [

] button to 

start playing.

6.  Follow the on-screen instruction to control the 

play option.

7.  Press the PLAY buttons (

) to 

control playing.

•  FAT32.

•  Music: MP3

•  Movie: AVI, MP4, MKV, MPG/MPEG

•  Photo: JPEG, BMP, PNG

•  The manufacturer is not responsible if 

the USB device is not supported, nor is it 

responsible for damage to or loss of data in 

the device.

•  Do not overload the USB port. If you connect 

a USB storage device that consumes more 

than 500mA power, make sure that it is 

connected to its own external power supply.

NOTE:  When you are playing multimedia files 

from USB device and turn the display off. 

It will set input source to the last real input 

source, such as VGA, HDMI when you turn 

the display on next time.