Sony XAVW1 Manual

 

“Custom” of EQ7 allows you to make your own 
equalizer settings. You can adjust the level of 7 
different bands: 62 Hz, 157 Hz, 396 Hz, 1 kHz, 
2.5 kHz, 6.3 kHz, and 16 kHz.

Touch “Tune.”
The tuning display appears.

Touch +/– of each frequency to adjust 
their levels.
The level is adjustable in single steps, 
between –8 and +8.
To restore the factory-set equalizer curve, 
touch “Reset.”

Touch “OK.”
The setting is complete.

To return to the previous display, touch 

.

To close the setup menu, touch “SETUP.”

The sound balance between left and right 
speakers (“Balance”) and front and rear speakers 
(“Fader”) can be adjusted to your preference. 
You can also adjust the volume level of center 
speaker and subwoofer if they are connected.

During playback/reception, touch 
“SETUP,” then the “Sound” tab.
The “Sound Setting” display appears.

Touch “Balance/Fader.”
The setting display appears.

I/i to adjust “Balance.”

The level is adjustable in single steps, 
between –10 and +10.

U/u to adjust the “Fader.”

The level is adjustable in single steps, 
between –10 and +10.

Touch +/– of “Center” and 
“Subwoofer” to adjust their volume 
level.*

* Adjustable only when a center speaker is 

connected and set to “Center Speaker ON” 
(page 32), and a subwoofer is connected and set 
to “Subwoofer ON” (page 32).

The level is adjustable in single steps, 
between –6 and +6.

To return to the previous display, touch 

.

To close the setup menu, touch “SETUP.”