Sony KV-24FV12 Manual

 Operating Instructions

Connect the coaxial cable from your TV antenna or cable service to 
the IN jack on your VCR.

Connect a coaxial cable (not supplied) from the OUT jack on your 
VCR to the VHF/UHF jack on the TV.

If your VCR is equipped with video outputs, you can get better 
picture quality by connecting A/V cables (not supplied) from 
AUDIO and VIDEO OUT on your VCR to AUDIO/VIDEO IN on 
your TV. 

✍

To watch video programs from your VCR, tune your TV to channel 3 or 4 (as 
set on the rear of your VCR).

✍

You can use the 

 

button to switch between the VHF/UHF and VIDEO 

inputs.

✍

For optimum picture quality, use S VIDEO (if your VCR is equipped with the 
S VIDEO connection) instead of the yellow A/V cable. S VIDEO does not 
provide sound, the audio cables must still be connected.