Avocent 210128 User Manual

 Chapter 4: Web Interface        39

Select General Statistics from the Main Menu.

The Port Statistics display includes the information described in Table 4.3 for one or all ports. All 
values are cumulative since the ESP hub was last reset. This display refreshes every five seconds.

1.

Select Port Statistics from the Main Menu. The Serial Port Selection window will open.

2.

Select a port number or all ports, then click Apply.

The Connection Status display has two sections: Serial Port Active Connection Status and Port 
Redirection Connections. This display refreshes every five seconds.

The Serial Port Active Connection Status section includes the information described in Table 4.4 
for one or all serial ports.

Status

Port status flags.

Destination IP Address

IP address of the server that has the port open.

Receive Bytes

Number of bytes received.

Transfer Bytes

Number of bytes transmitted.

Signals

Current value of the RS-232 signals: RTS, CTS, DTR, DSR and CD. A signal is 
listed in the display only if it is asserted (high).

Baudrate/Sz/Par/Stp

Baud rate, data size (5-8 bits), parity (N=none, O=odd, E=even, M=mark or 
S=space) and number of stop bits (1 or 2).

Frame/Parity/Overrun

Number of framing errors, parity errors and overruns.

Serial Connection Method

Connection method: serial port redirection, Telnet server, TCP server, TCP client, 
modem emulation, configuration utility or idle. If a port is idle, no other values will 
be displayed.

Destination IP Address

IP address of the remote server.