Sony EBS-SP10 Manual

SP-TUNE User Manual 

 

4

 
 

ON 

Switch Power on 

STBY 

Switch Power off 

ENTER 

Select option in menu 

Also finishes input in dialog panels 

VOLUME + 

Raises volume level 

VOLUME - 

Lowers volume level 

ARROWS 

When menu active – move the cursor 

up/down/left/right 

CHROMA 

Exit the current menu or dialog 

ID OFF 

Displays the Menu 

CONTRAST + 

Channel Up 

CONTRAST - 

Channel Down 

0..9, digits 

When no dialog input active – directly enter 
tuner channel number to switch to.  

When dialog input active – enter digits. 

 

1.  Make sure the SP-TUNE unit and the Sony Display are both disconnected from power. 
2.  Connect the SP-TUNE unit to the Sony Plasma Display using the supplied cable harness.  Each 

cable on the harness is labeled for the appropriate connection.  Make certain to plug the Control 
S phono connector into the Control S output of the display.  

 

 

 

3.  Connect the appropriate video source to input connectors of SP-TUNE (see “Connections” 

chapter for details). 

4.  Connect audio input/output to the 8-pin mini-DIN connector of SP-TUNE (see “Connections” 

chapter for details). 

5.  The RJ11 should be left unconnected as it is for Sony service purposes only.  

 Damage 

may occur if plug into a phone line or other RJ-11 connectors unintended for the port.  This will 
void the warranty.