Sony EBS-SP10 Manual
SP-TUNE User Manual
7
• “VGA”-connector Component (RGB+syncs, RGB with sync on green, or YPbPr) video
input
• Audio inputs/outputs (8pin mini DIN)
• RS-232 port for display control
• RS-232 port for display control
• Logic input port for current sensors
• IR Output for IR control of devices without RS-232 control
• RGB/YPbPr Output (480i/p signal for display device)
• IR Input for direct connection of IR from remote photo receivers
• RGB/YPbPr Output (480i/p signal for display device)
• IR Input for direct connection of IR from remote photo receivers
• IR Sensor (Built in Photo Sensor)
Example of interconnections for a display device, SP-TUNE, VCR (or other source of composite
video), and TV antenna or cable is shown below. Note that standard RCA cables for audio and video
connections, standard S-Video cable, or RF antenna cables are not supplied with the SP-TUNE.
connections, standard S-Video cable, or RF antenna cables are not supplied with the SP-TUNE.
S-Video 4-pin mini-DIN connector is intended for S-Video signal input (VCR, DVD, other signal
source).
The supplied audio input/output adapter cable has labels on cables near RCA connectors, indicating
the purpose of each RCA connector. These labels are:
SVideo Left Audio
SVideo Right Audio
YPbPr Right Audio
SVideo Right Audio
YPbPr Right Audio
YPbPr Left Audio
Video Left Audio
Video Right Audio
Line Out Left
Line Out Right
Video Left Audio
Video Right Audio
Line Out Left
Line Out Right