Sony FIU-710 Manual

Chapter 8: SecureSuite System Settings 

 

SecureSuite XS Workstation Guide 

 

 61 

Note: The following instructions assume that the OEM’s device module 
was previously installed with SecureSuite. For information on 

installing an OEM device module, refer to the Installing OEM Device 

Modules section in Chapter 12 of this manual. 

 

To add an authentication device to your system: 

1.  Since you have already installed the OEM device module, 

the method will be listed in the left pane of the 

 dialog.  Right-

click the method under which the device that you want to 
add is categorized, and select 

 from the menu 

that appears.  The 

 dialog 

appears, listing the installed authentication methods and 
associated devices that SecureSuite has detected, but 
which are currently not in use. 

2.  Select the authentication device you wish to add, and click 

.  The authentication device you selected will now be 

available in the right pane of the 

 dialog. 

 

To view or change the settings for an installed device: 

• 

Right-click the device, and select 

.  (This is 

not available for all devices.) 

 

To remove a device from your system: 

• 

Right-click the device you wish to remove, and select 

. 

Important:

 Please refer to the Sony® Puppy® installation guide (“Training Your 

Puppy Unit”) included in your package or on the CD-ROM for specific instructions 
on the installation and use of your fingerprint identity device.