Sony PCGA-DVD51 Manual
11
6
Select “SCSI controllers” from “Hardware types”
and then click [Next].
and then click [Next].
7
Click [Have Disk].
8
Check that the supplied installation disk is in the
floppy disk drive, ensure that “Copy manufacturer’s
files from” is “A:\” and then click [OK].
floppy disk drive, ensure that “Copy manufacturer’s
files from” is “A:\” and then click [OK].
9
Ensure that “Sony 16Bit ATAPI PC Card” appears
on the “Model” item and then click [Next].
on the “Model” item and then click [Next].
10
Click [Next].
11
Click [Finish].
In step 12, confirm the system settings.
12
Confirm the system settings.
To confirm the system settings
When the DVD-ROM drive is connected to the
computer after installing the driver, click the Start
button, select [Settings] , click [Control Panel],
double-click [System], click [Device Manager] and
then double-click [SCSI controllers]. If “PCMCIA
ATA Card” appears in the “System Properties”
window, you must perform the following procedure:
When the DVD-ROM drive is connected to the
computer after installing the driver, click the Start
button, select [Settings] , click [Control Panel],
double-click [System], click [Device Manager] and
then double-click [SCSI controllers]. If “PCMCIA
ATA Card” appears in the “System Properties”
window, you must perform the following procedure:
1
Click “PCMCIA ATA Card” and then click
[Remove].
The “Confirm” window appears.
[Remove].
The “Confirm” window appears.
2
Click [OK].
3
Remove the DVD-ROM drive from the
computer.
computer.
4
Reconnect the DVD-ROM drive to the
computer.
computer.
5
Ensure that “SCSI controllers” shows “Sony
16Bit ATAPI PC Card” in the “System
Properties” window.
16Bit ATAPI PC Card” in the “System
Properties” window.
Note
When confirming the
system settings, connect
the PC card of the DVD-
ROM drive without the
supplied AC adapter.
When confirming the
system settings, connect
the PC card of the DVD-
ROM drive without the
supplied AC adapter.