Sony VGN-FZ230E Manual

Last Revised:  April 2005

 

1/2

 

 

 
 

 
 

 
 

 
 

 
 
 

 
 

 
 

 
 

 
 
 

 
 

 
 

 
 

 
 
 

 
 

 
 

 
 

 
 
 

 
 

 
 

 
 

 
 
 

 
 

 
 

 
 

 

In order to protect your PC during 

transit, Sony Service Center has 
provided you with packaging 

material. Some assembly will be 

required and after assembled the 
packaging should look as shown on 

photo#1. 

 

 

If plastic film is missing do not proceed with these instructions, call 

customer support and request another box.

 

 Place tray with the plastic film facing down. In a single move, fold and hold 
small flaps in place (see photo #2) while rolling larger flap over small flaps (see 

photo #3). Complete the folding of larger flap by locking the 2 tabs onto open 

slot.

 

Turn tray, pre-fold and roll side flap towards inside of the tray (see photo #5), 
ensure that both tabs are fully inserted on open slots as shown on photo #6.

 

Rotate tray (see photo #4) and 
repeat the folding process with 

other side of the tray.

 

Fold and press down the end of tray 

as shown on photo #7.

 

 

Completed tray should look as shown 

on photo #9. Assemble the 2

nd

 tray 

by following same steps (#2 thru 

#8).

 

Fold flaps 

Tab 

Insert tabs in 

place 

Insert tabs in 

place 

Rotate tray (see photo #8) and 

continue the folding process with 

other side of tray.

 

Fold end of

insert