Sony VGN-FZ348E Manual

 

 

1/2

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

 

 

Step 1. Prepare the Computer.  
 

CAUTION

: Make sure the 

computer is turned off, the lid is 
closed, and the AC Adapter is 
disconnected. Failure to do so can 
result in damage to the computer. 
  
Place the computer upside down on a 
protected surface with the front edge 
facing you.

 

 

 
 

Step 2. Remove the Battery Pack.  
 
Locate the two tabs securing the battery 
pack. Using your thumbs and fingers 
push both tabs in the release direction. 
Carefully remove the battery by lifting the 
side where the arrow is pointing.

 

 
Step 3. Locate HDD Bay.  
 
Rotate the computer with the Hard 
Disk Drive (HDD) bay facing you as 
shown in the picture. 

 

 

These easy instructions are intended to guide you through the replacement process. If you need additional 
help, please call 1-866-651-7669 for technical support from 9:00 am to 11:00 pm EST. 

 
9

 

To avoid electric shock, please make sure product is turned off and AC Adaptor is disconnected 

from the power source. Remove jewelry before you begin work to avoid scratching the surface of 
your notebook computer.* 

 
9

 

Place your notebook computer on a clean, stable and covered surface to avoid damage to the 
computer’s case.* 

 
9

 

Follow the ESD (Electrostatic Discharge) damage prevention instructions: 

o  Hold parts by the edges, away from exposed circuitry when possible. 
o  Do not walk around excessively as this promotes static build-up. 

 

9

 

The appearance of the electronic components shown in the illustrations may be different from the 

components shipped. This slight difference does not affect the accuracy of these instructions.  

 

* Sony is not responsible for any loss of data associated with your computer or any damage caused by incorrect handling of 
the computer under these procedures. The terms of your Sony limited warranty continue to apply. 

 

HDD Bay 

Lift to remove 

Push tabs in the release direction