Sony SDM-S204 Manual
3
(US)
US
Connecting your monitor
Connect your monitor to a computer or other equipment.
1
Slide up the back cover.
2
Tilt the display forward.
3
Connect your monitor to a computer.
Connecting a Macintosh computer
Connect the supplied video signal cable to a video output connector
on the computer. If necessary, use an adapter (not supplied). Connect
the adapter to the computer before connecting the video signal cable.
on the computer. If necessary, use an adapter (not supplied). Connect
the adapter to the computer before connecting the video signal cable.
4
Connect the supplied power cord securely to the
monitor’s AC IN connector.
monitor’s AC IN connector.
5
Connect the other end securely to a power outlet.
Note
For bundling the cords and cables, refer to the Operating Instructions on
the supplied CD-ROM.
the supplied CD-ROM.
Turning on the monitor and
computer
computer
Turn on your monitor first, then a computer.
1
Press the MAIN POWER switch on the right side of
the monitor in the direction of the
the monitor in the direction of the
[
, if it is not
already pressed. Make sure the
1
(power) indicator
is lit in red.
Note
The default setting of the MAIN POWER switch is in the direction of
the [.
the [.
2
Press the
1
(power) switch on the front right of the
monitor.
The 1 (power) indicator lights up in green.
3
Turn on the computer.
• Turn off the monitor, computer, and any other
equipment before connecting them.
• Do not touch the pins of the video signal cable plug.
back cover
1
2
HD-15
DVI-D
HD-15
INPUT 1
INPUT 2
INPUT 3
to the DVI-D input
connector (digital RGB)
connector (digital RGB)
to the HD15 input
connector (analog RGB)
connector (analog RGB)
3
DVI-D video
signal cable
(digital RGB)
(supplied)
signal cable
(digital RGB)
(supplied)
5
power cord (supplied)
4
to AC IN
to power outlet
HD15-HD15 video signal
cable (analog RGB)
(supplied)
cable (analog RGB)
(supplied)
No need for specific drivers
The monitor complies with the “DDC” Plug & Play standard and
automatically detects all the monitor’s information. No specific driver
needs to be installed on the computer.
automatically detects all the monitor’s information. No specific driver
needs to be installed on the computer.
MAIN POWER
1
2