Manualsbrain.com
  1. Manuals
  2. Brands
  3. Sony
  4. SDM-X53
  5. Manual

Sony SDM-X53 Manual

Download
Page of 16
3 
(US)
US
Connecting your monitor
Connect your monitor to a computer or other equipment.
1
Slide up the back cover.
2
Tilt the display forward.
3
Connect your monitor to a computer.
Connecting a Macintosh computer
Connect the supplied video signal cable to a video output connector 
on the computer. If necessary, use an adapter (not supplied). Connect 
the adapter to the computer before connecting the video signal cable.
4
Connect the supplied power cord to the monitor’s 
AC IN connector.
5
Connect the power cord to a power outlet.
.
Note
For bundling the cords and cables, refer to the Operating Instructions on 
the supplied CD-ROM.
Turning on the monitor and 
computer
Turn on your monitor first, then a computer.
1
Press the MAIN POWER switch on the right side of 
the monitor in the direction of the 
[
, if it is not 
already pressed. Make sure the 
1
 ( power) indicator 
is lit in red.
Note
The default setting of the MAIN POWER switch is in the direction of 
the [.
2
Press the 
1
 (power) switch on the front right of the 
monitor.
The 1 (power) indicator lights up in green.
3
Turn on the computer.
• Turn off the monitor, computer, and any other 
equipment before connecting them.
• Do not touch the pins of the video signal cable plug.
back cover
1
2
HD-15
AUDIO
IN
DVI-D
AUDIO 1
AUDIO 1
HD-15
INPUT 1
INPUT 2
INPUT 3
to the DVI-D input 
connector (digital RGB) 
to the HD15 input 
connector (analog RGB)
3
audio cord
(supplied)
DVI-D video 
signal cable 
(digital RGB) 
(supplied)
5
power cord (supplied)
4
to AC IN
to power outlet
HD15-HD15 video signal 
cable (analog RGB) 
(supplied)
The rear of the display 
describes SDM-X73.
SDM-X53 has one 
HD15 input connector.
MAIN POWER
1
2