Sony DR-BT30Q Manual
25
US
, Check that the volume of the
BLUETOOTH device is not set too
low if the BLUETOOTH device has a
volume control.
low if the BLUETOOTH device has a
volume control.
, Pair this unit and BLUETOOTH
device again.
Low sound level
, Turn up the volume of this unit.
, Turn up the volume of the
BLUETOOTH device if the
BLUETOOTH device has a volume
control.
BLUETOOTH device has a volume
control.
Low sound quality
, Switch the BLUETOOTH connection
to A2DP (Advanced Audio
Distribution Profile) when HSP
(Headset Profile) is set.
Distribution Profile) when HSP
(Headset Profile) is set.
When calling
The recipient’s voice
cannot be heard.
cannot be heard.
, Check that both this unit and the
BLUETOOTH mobile phone are
turned on.
turned on.
, Check the connection between this
unit and the BLUETOOTH mobile
phone.
phone.
, Check that output of the
BLUETOOTH mobile phone is set
for this unit.
for this unit.
, Check that the volume of the unit is
not set too low.
, Check that the volume of the
BLUETOOTH mobile phone is not
set too low if the BLUETOOTH
mobile phone has a volume control.
set too low if the BLUETOOTH
mobile phone has a volume control.
, If you are listening to music using
this unit, stop playback, press the
multi function button and talk.
multi function button and talk.
Low sound from recipient
, Turn up the volume of this unit.
, Turn up the volume of the
BLUETOOTH mobile phone if the
BLUETOOTH mobile phone has a
volume control.
BLUETOOTH mobile phone has a
volume control.
Initializing the
unit
unit
You can reset this unit to its default
(such as volume setting) and delete
all pairing information.
(such as volume setting) and delete
all pairing information.
1
If this unit is turned on,
press and hold the
POWER button for
about 3 seconds to turn
off this unit.
press and hold the
POWER button for
about 3 seconds to turn
off this unit.
2
Press and hold the
POWER button and
multi function button
together for about
7 seconds.
POWER button and
multi function button
together for about
7 seconds.
The indicator (blue) and
indicator (red) flash together
four times, and this unit is reset
to the default setting. All pairing
information is deleted.
indicator (red) flash together
four times, and this unit is reset
to the default setting. All pairing
information is deleted.