Sony MDR-AS800BT Manual

Page of 2
MDR-AS800BT
4-542-124-
12(1)
Wireless Stereo Headset
Casque stéréo sans fil
Auriculares estéreo inalámbricos
Reference Guide
US
Guide de référence
FR
Guía de referencia
ES
http://www.sony.net/
©2014  Sony Corporation  Printed in China
English
WARNING
To reduce the risk of electrical shock, do not open the 
cabinet. Refer servicing to qualified personnel only.
Do not install the appliance in a confined space, such as a 
bookcase or built-in cabinet.
Do not expose the batteries (battery pack or batteries installed) 
to excessive heat such as sunshine, fire or the like for a long 
time.
Information
FOR UNITED STATES CUSTOMERS. NOT APPLICABLE IN 
CANADA, INCLUDING IN THE PROVINCE OF QUEBEC.
POUR LES CONSOMMATEURS AUX ÉTATS-UNIS. NON 
APPLICABLE AU CANADA, Y COMPRIS LA PROVINCE 
DE QUÉBEC.
This device complies with Part 15 of the FCC Rules. Operation 
is subject to the following two conditions: (1) this device 
may not cause harmful interference, and (2) this device must 
accept any interference received, including interference that 
may cause undesired operation.
You are cautioned that any changes or modifications not 
expressly approved in this manual could void your authority 
to operate this equipment.
This equipment must not be co-located or operated in 
conjunction with any other antenna or transmitter.
Note
This equipment has been tested and found to comply with 
the limits for a Class B digital device, pursuant to Part 15 of 
the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference in a 
residential installation. This equipment generates, uses and 
can radiate radio frequency energy and, if not installed and 
used in accordance with the instructions, may cause harmful 
interference to radio communications. However, there is no 
guarantee that interference will not occur in a particular 
installation. If this equipment does cause harmful 
interference to radio or television reception, which can be 
determined by turning the equipment off and on, the user is 
encouraged to try to correct the interference by one or more 
of the following measures:
 
ē Reorient or relocate the receiving antenna.
 
ē Increase the separation between the equipment and 
receiver.
 
ē Connect the equipment into an outlet on a circuit 
different from that to which the receiver is connected.
 
ē Consult the dealer or an experienced radio/TV technician 
for help.
This device complies with Industry Canada licence-exempt RSS 
standard(s). Operation is subject to the following two 
conditions: (1) this device may not cause interference, and (2) 
this device must accept any interference, including interference 
that may cause undesired operation of the device.
This equipment complies with FCC/IC radiation exposure limits 
set forth for an uncontrolled environment and meets the FCC 
radio frequency (RF) Exposure Guidelines and RSS-102 of the IC 
radio frequency (RF) Exposure rules. This equipment has very 
low levels of RF energy that are deemed to comply without 
testing of specific absorption ratio (SAR).
The BlUETOOTH word mark and logos are owned by the 
Bluetooth SIG, Inc. and any use of such marks by Sony 
Corporation is under license.
The N Mark is a trademark or registered trademark of NFC 
Forum, Inc. in the United States and in other countries.
Microsoft, Windows and Windows Vista are registered 
trademarks or trademarks of Microsoft Corporation in the 
United States and/or other countries.
Mac and Mac OS are trademarks of Apple Inc., registered in the 
U.S. and other countries. 
The aptX
®
 mark and the aptX logo are trade marks of CSR plc 
or one of its group companies and may be registered in one or 
more jurisdictions.
Other trademarks and trade names are those of their respective 
owners.
Precautions
On BLUETOOTH communications
 
ˎ BlUETOOTH wireless technology operates within a range of 
about 10 meters (30 feet). Maximum communication range 
may vary depending on obstacles (human body, metal, wall, 
etc.) or electromagnetic environment.
 
ˎ The antenna is built into the unit as illustrated in the dotted 
line. The sensitivity of the BlUETOOTH communications will 
improve by turning the direction of the built-in antenna to 
the connected BlUETOOTH device. When obstacles are 
between the antenna of the connected device and the 
built-in antenna of this unit, noise or audio dropout may 
occur, or communications may be disabled.
 
ˎ BlUETOOTH communications may be disabled, or noise or 
audio dropout may occur under the following conditions.
 
ē There is a human body between the unit and the 
BlUETOOTH device. 
This situation may be improved by placing the BlUETOOTH 
device facing the antenna of the unit.
 
ē There is an obstacle, such as metal or wall, between the 
unit and the BlUETOOTH device.
 
ē A device using 2.4 GHz frequency, such as a Wi-Fi device, 
cordless telephone, or microwave oven, is in use near this 
unit.
 
ˎ Because BlUETOOTH devices and Wi-Fi (IEEE802.11b/g) use 
the same frequency (2.4 GHz), microwave interference may 
occur resulting in noise or audio dropout or communications 
being disabled if this unit is used near a Wi-Fi device. In such 
a case, perform the following.
 
ē Use this unit at least 10 meters (30 feet) away from the 
Wi-Fi device.
 
ē If this unit is used within 10 meters (30 feet) of a Wi-Fi 
device, turn off the Wi-Fi device.
 
ē Install this unit and the BlUETOOTH device as near to each 
other as possible.
 
ˎ Microwaves emitting from a BlUETOOTH device may affect 
the operation of electronic medical devices. Turn off this unit 
and other BlUETOOTH devices in the following locations, as it 
may cause an accident:
 
ē where inflammable gas is present, in a hospital, train, 
airplane, or a petrol station
 
ē near automatic doors or a fire alarm
 
ˎ This unit supports security capabilities that comply with the 
BlUETOOTH standard to provide a secure connection when 
the BlUETOOTH wireless technology is used, but security may 
not be enough depending on the setting. Be careful when 
communicating using BlUETOOTH wireless technology.
 
ˎ We do not take any responsibility for the leakage of 
information during BlUETOOTH communications.
 
ˎ Connection with all BlUETOOTH devices cannot be 
guaranteed.
 
ē A device featuring BlUETOOTH function is required to 
conform to the BlUETOOTH standard specified by 
Bluetooth SIG, Inc. and be authenticated.
 
ē Even if the connected device conforms to the above 
mentioned BlUETOOTH standard, some devices may not 
be connected or work correctly, depending on the features 
or specifications of the device.
 
ē While talking on the phone hands free, noise may occur, 
depending on the device or communication environment.
 
ˎ Depending on the device to be connected, it may require 
some time to start communications.
On charging the unit
 
ˎ This unit can be charged using USB only. Personal computer 
with USB port, or USB Charging AC Power Adaptor AC-UD20 
(sold separately) is required for charging.
 
ˎ This unit cannot be turned on, nor can the BlUETOOTH 
function be used, during charging.
Note on static electricity
 
ˎ Static electricity accumulated in the body may cause mild 
tingling in your ears. To minimise the effect, wear clothes 
made from natural materials.
If the unit does not operate properly
 
ˎ Reset the unit. 
Set the unit in charging status, then press the multi-function 
button. The unit will be reset. Pairing information is not 
deleted.
Multi-function 
button
 
ˎ If the problem persists even after the resetting operation 
above, initialize the unit as follows. 
Turn off the unit by pressing the multi-function button for 
more than 2 seconds. Then, press and hold the multi-function 
button for more than 15 seconds. The indicator (blue) flashes 
4 times, and the unit is reset to the factory settings. All 
pairing information is deleted.
Water resistance performance
The water resistance specifications 
1)
 of this unit are 
equivalent to IPX4 
2)
 in IEC 60529 “Degrees of protection 
against ingress of water (IP Code)”, which specifies the 
degree of protection provided against the entry of water. 
However, the unit cannot be used in water. Unless the unit is 
used correctly, water may get into the unit and cause fire, 
electrocution, or malfunctions. Note the following cautions 
carefully and use the unit correctly.
Liquids that the water resistance performance 
specifications apply to
Applicable: Fresh water, tap water, perspiration
Not applicable: liquids other than those above 
(examples: soapy water, detergent water, water with bath 
agents, shampoo, hot spring water, pool water, seawater, 
etc.)
1)
  Make sure that the micro-USB port cover is closed securely 
when you use the unit.
2)
  IPX4 (degree of protection against splashing water): 
Protected against water splashing from any direction.
Water resistance performance of the unit is based on Sony 
measurements under the conditions described above. Note 
that malfunctions as a result of water immersion caused by 
misuse by the customer are not covered by the warranty.
To maintain water resistance performance
Note the following cautions carefully and use the unit 
correctly.
 
ˎ Do not drop the unit or expose it to mechanical shock. 
Doing so may deform or damage the unit, resulting in 
deterioration of water resistance performance.
 
ˎ Do not put the unit in water or use it in a humid place such 
as a bathroom.
 
ˎ The micro-USB port cover is important for maintaining 
water resistance performance. Make sure the micro-USB 
port cover is closed securely when you use the unit. If the 
cover has any foreign objects on it or is not completely 
closed, water resistance performance cannot be 
maintained. In addition, water may get into the unit and 
cause malfunctions.
 
ˎ Do not splash water forcibly against the cylindrical part 
from which sound is emitted. Doing so may deteriorate the 
water resistance performance of the unit.
 
ˎ Wipe off with a soft dry cloth any water that gets on the 
unit. If water remains in the earbud holes, the sound may 
seem low or not be audible at all. In this case, remove the 
earbuds and wipe off the water. 
Do not leave the unit with water on it in cold places as the 
water may freeze. 
In order to avoid malfunctions, make sure that you wipe off 
water after use.
Others
 
ˎ Do not place this unit in a place exposed to humidity, dust, 
soot or steam, or subject to direct sunlight. Do not leave the 
unit in a car for a long time. It may cause a malfunction.
 
ˎ Using the BlUETOOTH device may not function on mobile 
phones, depending on radio wave conditions and location 
where the equipment is being used.
 
ˎ If you experience discomfort after using the BlUETOOTH 
device, stop using the BlUETOOTH device immediately. 
Should any problem persist, consult your nearest Sony dealer.
 
ˎ listening with this unit at high volume may affect your 
hearing. For traffic safety, do not use this unit while driving or 
cycling.
 
ˎ Do not put weight or pressure on this unit as it may cause the 
unit to deform during long storage.
 
ˎ Do not subject the unit to excessive shock.
 
ˎ Clean the unit with a soft dry cloth.
 
ˎ If you have any questions or problems concerning this unit 
that are not covered in this manual, please consult your 
nearest Sony dealer.
Optional replacement earbuds, arc supporters, and 
adjustment band can be ordered from your nearest Sony 
dealer.
Specifications
General
Communication system: BlUETOOTH Specification version 3.0
Output: BlUETOOTH Specification Power Class 2
Maximum communication range: line of sight approx. 10 m 
(30 ft)
1)
Frequency band: 2.4 GHz band (2.4000 GHz - 2.4835 GHz)
Modulation method: FHSS
Compatible BLUETOOTH profiles
2)
:  
A2DP (Advanced Audio Distribution Profile) 
AVRCP (Audio Video Remote Control Profile) 
HFP (Hands-free Profile) 
HSP (Headset Profile)
Supported Codec
3)
: SBC
4)
, AAC
5)
, aptX
Supported content protection method: SCMS-T
Transmission range (A2DP): 20 Hz - 20,000 Hz (Sampling 
frequency 44.1 kHz)
Included items:  
Wireless stereo headset (1) 
Micro-USB cable (approx. 50 cm (19 3/4 in.)) (1) 
long Hybrid silicone rubber earbuds (SS/S/M/l 2 each) 
Arc supporters (S/M/l 2 each) 
Adjustment band (1) 
Carrying case (1) 
Reference Guide (this sheet) (1) 
Quick Start Guide (1) 
Other documents (1 set)
Recommended accessory:  
USB Charging AC Power Adaptor: AC-UD20 (sold 
separately) 
Spare earbuds: EP-EX10A (sold separately)
1)
  The actual range will vary depending on factors such as 
obstacles between devices, magnetic fields around a 
microwave oven, static electricity, reception sensitivity, 
antenna’s performance, operating system, software 
application, etc.
2)
  BlUETOOTH standard profiles indicate the purpose of 
BlUETOOTH communications between devices.
3)
  Codec: Audio signal compression and conversion format
4)
  Subband Codec
5)
  Advanced Audio Coding
Wireless Stereo Headset
Power source:  
DC 3.7 V: Built-in lithium-ion rechargeable battery 
DC 5 V: When charged using USB
Mass: Approx. 16 g (0.6 oz) (not including the arc supporters)
Operating temperature: 0 °C to 40 °C (32 °F to 104 °F)
Rated power consumption: 0.6 W
Usage hours:  
When connecting via the BlUETOOTH device 
  Music playback time: Max. 4.5 hours 
  Communication time: Max. 4.5 hours 
  Standby time: Max. 180 hours 
Note: Usage hours may be shorter depending on the 
Codec and the conditions of use.
Charging time:  
Approx. 2 hours
Charging temperature: 10 °C to 35 °C (50 °F to 95 °F)
Receiver
Type: Closed, Dynamic
Driver units: 6 mm
Frequency response: 20 Hz - 20,000 Hz
Microphone
Type: MEMS
Directivity: Omni directional
Effective frequency range: 100 Hz - 4,000 Hz
System requirements for battery 
charge using USB
Personal Computer with USB port and pre-installed with any of 
the following operating systems:
Operating Systems
(when using Windows)
Windows
®
 8.1 / Windows
®
 8.1 Pro
Windows
®
 8 / Windows
®
 8 Pro
Windows
®
 7 
Home Basic / Home Premium / Professional / Ultimate
Windows Vista
®
 (Service Pack 2 or later) 
Home Basic / Home Premium / Business / Ultimate
(when using Mac)
Mac OS X (version.10.3 or later)
Design and specifications are subject to change without notice.
Français
AVERTISSEMENT
Pour éviter tout risque d’électrocution, n’ouvrez pas le 
coffret. Ne confiez les réparations qu’à un technicien 
qualifié.
N’installez pas l’appareil dans un espace restreint, comme une 
bibliothèque ou un meuble encastré.
N’exposez pas les piles (piles rechargeables ou installées) à une 
chaleur excessive comme à la lumière du soleil, au feu ou à 
d’autres sources de chaleur pendant une période prolongée.
Information
le présent appareil est conforme aux CNR d’Industrie Canada 
applicable aux appareils radio exempts de licence. 
l’exploitation est autorisée aux deux conditions suivantes : (1) 
l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur 
de l’appareil doit accepter tout brouillage radioélectrique subi, 
même si le brouillage est susceptible d’en compromettre le 
fonctionnement.
Cet équipement est conforme aux limites d’exposition aux 
rayonnements énoncées pour un environnement non contrôlé 
et respecte les règles les radioélectriques (RF) de la FCC lignes 
directrices d’exposition et d’exposition aux fréquences 
radioélectriques (RF) CNR-102 de l’IC. Cet équipement émet une 
énergie RF très faible qui est considérée conforme sans 
évaluation du débit d’absorption spécifique (DAS).
la marque de mot BlUETOOTH et les logos sont la propriété de 
Bluetooth SIG, Inc. et l’utilisation de ces marques par Sony 
Corporation est effectuée sous licence.
N Mark est une marque commerciale ou une marque déposée 
de NFC Forum, Inc. aux États-Unis et dans d’autres pays.
Microsoft, Windows et Windows Vista sont des marques 
déposées ou des marques de commerce de Microsoft 
Corporation aux États-Unis et/ou dans les autres pays.
Mac et Mac OS sont des marques commerciales de Apple Inc., 
déposées aux États-Unis et dans d’autres pays.
la marque aptX
®
 et le logo aptX sont des marques 
commerciales de CSR plc ou d’une des sociétés de son groupe, 
et ils peuvent être déposés dans une ou plusieurs juridictions.
les autres marques commerciales et noms commerciaux 
appartiennent à leurs propriétaires respectifs.
Précautions
Communications BLUETOOTH
 
ˎ la technologie BlUETOOTH sans fil fonctionne dans un rayon 
d’environ 10 mètres (30 pieds). la portée de communication 
maximale peut varier en fonction des obstacles (personnes, 
éléments métalliques, mur, etc.) ou de l’environnement 
électromagnétique.
 
ˎ l’illustration ci-dessous indique l’emplacement de l’antenne 
intégrée sur l’appareil. la sensibilité des communications 
BlUETOOTH pourra être améliorée en orientant l’antenne 
intégrée vers le périphérique BlUETOOTH connecté. lorsque 
des obstacles se trouvent entre l’antenne du périphérique 
connecté et l’antenne intégrée de cet appareil, des parasites 
ou des pertes de niveau audio peuvent se produire, ou les 
communications peuvent être désactivées.
 
ˎ les communications BlUETOOTH peuvent être désactivées, 
ou bien des parasites ou des pertes de niveau audio peuvent 
se produire dans les conditions suivantes.
 
ē Une personne se trouve entre l’appareil et le périphérique 
BlUETOOTH. 
Cette situation peut être améliorée en plaçant le 
périphérique BlUETOOTH en face de l’antenne de 
l’appareil.
 
ē Un obstacle, par exemple un objet métallique ou un mur, se 
trouve entre l’appareil et le périphérique BlUETOOTH.
 
ē Un appareil utilisant une fréquence de 2,4 GHz, par 
exemple un périphérique Wi-Fi, un téléphone sans fil ou un 
four à micro-ondes, est utilisé à proximité de cet appareil.
 
ˎ Comme les appareils BlUETOOTH et Wi-Fi (IEEE802.11b/g) 
utilisent la même fréquence (2,4 GHz), des interférences de 
micro-ondes peuvent se produire et entraîner des parasites, 
des pertes de niveau audio ou la désactivation des 
communications si cet appareil est utilisé près d’un 
périphérique Wi-Fi. En pareil cas, prenez les mesures 
suivantes.
 
ē Utilisez cet appareil à au moins 10 mètres (30 pieds) du 
périphérique Wi-Fi.
 
ē Si cet appareil est utilisé dans un rayon de 10 mètres 
(30 pieds) par rapport au périphérique Wi-Fi, mettez ce 
dernier hors tension.
 
ē Installez cet appareil et le périphérique BlUETOOTH aussi 
près que possible l’un de l’autre.
 
ˎ les émissions hyperfréquences d’un périphérique 
BlUETOOTH peuvent perturber le fonctionnement des 
appareils médicaux électroniques. Mettez hors tension cet 
appareil et les autres périphériques BlUETOOTH situés dans 
les endroits suivants afin d’éviter tout accident :
 
ē en présence de gaz inflammable, dans un hôpital, un train, 
un avion ou une station essence
 
ē à proximité de portes automatiques ou d’alarmes incendie
 
ˎ Cet appareil prend en charge les caractéristiques de sécurité 
conformes à la norme BlUETOOTH pour offrir une connexion 
sécurisée lors de l’utilisation de la technologie sans fil 
BlUETOOTH. Cependant, la sécurité peut être insuffisante 
selon le réglage. Soyez prudent lorsque vous communiquez 
au moyen de la technologie sans fil BlUETOOTH.
 
ˎ Nous ne pouvons être tenus responsables de la fuite 
d’informations lors de communications BlUETOOTH.
 
ˎ la connexion ne peut pas être garantie avec tous les 
périphériques BlUETOOTH.
 
ē Un périphérique doté de la fonction BlUETOOTH est 
nécessaire pour la conformité à la norme BlUETOOTH 
spécifiée par Bluetooth SIG, Inc. et pour l’authentification.
 
ē Même si le périphérique raccordé est conforme à la norme 
BlUETOOTH précédemment mentionnée, certains 
périphériques peuvent ne pas se connecter ou ne pas 
fonctionner correctement, selon leurs caractéristiques ou 
spécifications.
 
ē lors de communications téléphoniques mains libres, des 
parasites peuvent se produire, selon le périphérique ou 
l’environnement de communication.
 
ˎ Selon le périphérique à connecter, le délai avant le début des 
communications peut être plus ou moins long.
Chargement de l’appareil
 
ˎ Cet appareil ne peut être chargé que par USB. Ordinateur 
personnel avec port USB ou adaptateur CA de charge USB 
AC-UD20 (vendu séparément) requis pour la charge.
 
ˎ lors du chargement, cet appareil ne peut pas être mis sous 
tension et la fonction BlUETOOTH ne peut pas être utilisée.
Remarque sur l’électricité statique
 
ˎ l’électricité statique qui s’accumule dans le corps peut causer 
de légers picotements dans les oreilles. Pour réduire cet effet, 
portez des vêtements fabriqués en matières naturelles.
Si l’appareil ne fonctionne pas correctement
 
ˎ Réinitialisez l’appareil. 
Réglez l’appareil en état de charge, puis appuyez sur le 
bouton multifonction. l’appareil est réinitialisé. les 
informations de pairage ne sont pas supprimées.
Bouton 
multifonction