Sony DSX-M50BT Manual

13

GB

Listening to the Radio

Tuning step setting is required (page 10).
To listen to the radio, press SOURCE to select 
[TUNER].

1

Press MODE to change the band.

2

Press and hold SELECT (FM1, FM2, 
FM3, AM1 or AM2).

The setup display appears.

3

Rotate the control dial to select 
[BTM], then press it.

The unit stores stations in order of 
frequency on the number buttons.

1

Press MODE to change the band 
(FM1, FM2, FM3, AM1 or AM2).

2

Perform tuning.

To tune manually
Press and hold SEEK +/– to locate the 
approximate frequency, then press SEEK 
+/– repeatedly to fine adjust to the 
desired frequency.

To tune automatically
Press SEEK +/–.

Scanning stops when the unit receives a 
station. Repeat this procedure until the 
desired station is received.

1

While receiving the station that you 
want to store, press and hold a 
number button (1 to 6) until [MEM] 
appears.

1

Select the band, then press a 
number button (1 to 6).

Using Radio Data System 
(RDS)

Use PTY to display or search for a desired 
program type.

1

Press PTY during FM reception.

2

Rotate the control dial until the 
desired program type appears, 
then press it.

The unit starts to search for a station 
broadcasting the selected program type.

Listening to the Radio

Storing automatically (BTM)

Tuning

Storing manually

Receiving the stored stations

Selecting program types (PTY)