Sony CXS-M2016 Manual
13
Sound Settings and
Setup Menu
Setup Menu
Changing the sound
settings
settings
Adjusting the sound
characteristics
characteristics
1
During reception/playback, press the
select button.
select button.
2
Rotate the control dial until the desired
menu item appears, then press it.
menu item appears, then press it.
3
Rotate the control dial to select the
setting, then press it.
setting, then press it.
4
Press
(BACK).
The following items can be set:
*1 When EQ3 is activated (page 13).
*2 When the audio output is set to “SUB-OUT”
(page 14).
“ATT” is displayed at the lowest setting, and
can be adjusted up to 21 steps.
“ATT” is displayed at the lowest setting, and
can be adjusted up to 21 steps.
*3 When AUX source is activated (page 15).
Customizing the equalizer
curve — EQ3
curve — EQ3
“CUSTOM” of EQ3 allows you to make
your own equalizer settings.
your own equalizer settings.
1
During reception/playback, press
repeatedly to select
“CUSTOM,” then press
repeatedly to select
“CUSTOM,” then press
(BACK).
2
Press the select button.
3
Rotate the control dial until “EQ3
LOW,” “EQ3 MID” or “EQ3 HIGH”
appears, then press it.
LOW,” “EQ3 MID” or “EQ3 HIGH”
appears, then press it.
4
Rotate the control dial to adjust the
selected item, then press it.
The volume level is adjustable in 1 dB
steps, from –10 dB to +10 dB.
selected item, then press it.
The volume level is adjustable in 1 dB
steps, from –10 dB to +10 dB.
Repeat steps 2 and 3 to adjust the
equalizer curve.
To restore the factory-set equalizer
curve, press and hold the select button
before the setting is complete.
equalizer curve.
To restore the factory-set equalizer
curve, press and hold the select button
before the setting is complete.
5
Press
(BACK).
EQ3 LOW
*
1
EQ3 MID
*
1
EQ3 HIGH
*
1
BALANCE
Adjusts the sound balance: “RIGHT-15
(R15)” – “CENTER (0)” – “LEFT-15
(L15).”
(R15)” – “CENTER (0)” – “LEFT-15
(L15).”
FADER
Adjusts the relative level: “FRONT-15
(F15)” – “CENTER (0)” – “REAR-15
(R15).”
(F15)” – “CENTER (0)” – “REAR-15
(R15).”
SW LEVEL
*
2
(Subwoofer Level)
Adjusts the subwoofer volume level:
“+10 dB” – “0 dB” – “–10 dB.”
(“ATT” is displayed at the lowest
setting.)
“+10 dB” – “0 dB” – “–10 dB.”
(“ATT” is displayed at the lowest
setting.)
AUX VOL
*
3
(AUX Volume level)
Adjusts the volume level for each
connected auxiliary equipment: “+18
dB” – “0 dB” – “–8 dB.”
This setting negates the need to adjust
the volume level between sources.
connected auxiliary equipment: “+18
dB” – “0 dB” – “–8 dB.”
This setting negates the need to adjust
the volume level between sources.