Sony BKM-21D Manual

Sony Corporation 

 

 

1999

Printed in Japan

4-076-168-02(1)

right or fit a cover plate (see Fig. 1) over that slot.
Doing so may cause the radiation shield (see Fig. 2) of
the BKM-41HD/42HD to be damaged or detached.

When input option slots on the rear of the monitor are
already fitted with a BKM-41HD/42HD HD SDI Input
Adaptor (option), do not try to install another adaptor
or the analog input connectors board in the slot to the

 Fig. 1

Fig. 2

HD SDI Input Adaptor

Cover plates

Analog input connectors board

BKM-41HD/42HD

Input adaptor, etc.

Radiation shield

Input option slots

When installing adaptors, moving the analog input
connectors board, or fitting a cover plate over an
unused slot, always fit the BKM41HD/42HD at the
last step of the operation. If a BKM-41HD/42HD is
already installed, remove it temporarily while carrying
out the other operations, then reinstall it last.

When installing two or more BKM-41HD/42HD and
BKM-20D/21D adaptors in any combination, first use
the rightmost option slot, then the second rightmost
option slot, and so on. (Before carrying out this
installation operation, make sure that the slot to the
right of the target slot(s) is already fitted with an
adaptor.)