Sony CFD-922 Manual

Press CD (direct power-on).

Close the CD compartment.

Press u (N on the remote, CFD-S32/S32L only).
The player plays all the tracks once.

adjust the volume

stop playback

pause playback

go to the next track

go back to the previous track

remove the CD

turn on/off the player

Checking the total track number and playing time
Press DISPLAY ENT•MEMORY in stop mode.

Checking the remaining time
Press DISPLAY ENT•MEMORY while playing a CD.

the current track number and
the remaining time on the current track*

the number of tracks left
and remaining time on the CD

the current track number
and playing time
* For a track whose number is more than 20, the remaining time appears as

“- -:- -” in the display.

a specific track directly

a point while listening
to the sound

a point while observing
the display

When you locate a track numbered over 10, press >10 first, then the
corresponding number buttons.
Example:To play track number 23, press >10 first, then 2 and 3.

You cannot locate a specific track if "SHUF" or "PGM" is lit in the display.
Turn off the indication by pressing x.

Press CD.

Proceed as follows:

a single track

all the tracks

tracks in random order

programmed tracks

To cancel Repeat Play
Press PLAY MODE•MONO/ST until “REP” disappears from the display.

Press CD.

Press PLAY MODE•MONO/ST until “SHUF” appears in the
display.

Press u to start shuffle play.

To cancel Shuffle Play
Press PLAY MODE•MONO/ST until “SHUF” disappears from the display.

Press CD.

Press PLAY MODE•MONO/ST until “PGM” appears in the
display.

Press the number buttons for the tracks you want to
programme in the order you want. You can arrange the playing
order of up to 20 tracks.

Press u to start program play.

To cancel Programme Play
Press PLAY MODE•MONO/ST until “PGM” disappears from the display.

To check the order of tracks before play
Press DISPLAY ENT•MEMORY.
Every time you press the button, the track number appears in the
programed order.

To change the current programme
Press x once if the CD is stopped and twice if the CD is playing. The
current program will be erased. Then create a new programme following
the programming procedure.

Tips
• You can play the same program again, since the program is saved until

you open the CD compartment.

• You can record your own program. After you’ve created the programme,

insert a blank tape and press z to start recording.

c

VOLUME +, – (VOL +, – on the remote,
CFD-S32/S32L only)

x

u 

(X on the remote, CFD-S32/S32L only)

Press the button again to resume play after
pause.

>

.

Z

 PUSH OPEN/CLOSE

OPERATE (or POWER)

once

twice

three times

1 Press PLAY MODE•MONO/ST until

“REP 1” appears.

2 Press the number button for the track

you want to repeat.

1 Press PLAY MODE•MONO/ST until

“REP ALL” appears.

2 Press u.

1 Press PLAY MODE•MONO/ST until

“SHUF REP” appears.

2 Press u.

1 Press PLAY MODE•MONO/ST until

“PGM REP” appears.

2 Press the number buttons for the tracks

you want to programme in the order you
want up to 20 tracks.

3 Press u.

Reinforcing the bass sound
Press MEGA BASS.
"MEGA BASS" appears in the display.
To return to normal sound, press the button again.

Adjusting the tone (CFD-S32/S32L only)
Press TONE.

the high tone

the low tone

Z

TUNING –, +
.

, >

i

x

u

Press RADIO BAND•AUTO PRESET until the band you
want appears in the display (direct power-on).
Each time you press the button, the indication changes as
follows:
CFD-S22/S32:  “FM1” n “FM2” n “AM”
CFD-S22L/S32L/922L:  “FM1” n “FM2” n “MW” n

  “LW”.

Hold down TUNING + or – (TUNE + or – on the remote,
CFD-S32/S32L only) until the frequency digits begin to
change in the display.

The player automatically scans the radio frequencies and
stops when it finds a clear station.
If you can't tune in a station, press the button repeatedly
to change the frequency step by step.

adjust the volume

turn on/off the radio

To improve broadcast reception
Reorient the antenna for FM. Reorient the player itself for AM or
MW/LW.

Tips
• The "FM1" and "FM2" bands have the same functions. You can store the

stations you want separately in "FM1" and "FM2".

• If the FM broadcast is noisy, press PLAY MODE•MONO/ST until

"Mono" appears in the display and the radio will play in monaural.

VOLUME +, – (VOL +, – on the remote,
CFD-S32/S32L only)

OPERATE (or POWER)

a number button of the track.

>

 (forward) or . (backward) while

playing until you find the point.

>

 (forward) or . (backward) in

pause until you find the point.

HI

LO

You can store radio stations into the player’s memory. You can preset up
to 30 radio stations (CFD-S22/S32) or 40 radio stations (CFD-S22L/S32L/
922L), 10 for each band in any order.

Press RADIO BAND•AUTO PRESET to select the band.

Hold down RADIO BAND•AUTO PRESET for 2 seconds
until "AUTO" flashes in the display.

Press DISPLAY ENT•MEMORY.
The stations are stored in memory from the lower frequencies
to the higher ones.

If you automatically preset the "FM1" or "FM2" band, 10 radio stations
are stored in "FM1" band and 10 more radio stations are stored in
"FM2" band.

If a station cannot be preset automatically
You need to preset a station with a weak signal manually.

Press RADIO BAND•AUTO PRESET to select the band.

Tune in a station you want.

Hold down the number buttons that you want to preset the new station
on for about 2 seconds.

The new station replaces the old one.

Press RADIO BAND•AUTO PRESET to select the band.

Press the number buttons to tune in the stored station.

To listen through headphones, connect the headphones to the
i 

(headphones) jack.

CD/RADIO DIRECT  OPERATION

x

X

N

.

, >

* MODE on the remote has the same function

as PLAY MODE•MONO/ST on the player.

CD/RADIO DIRECT  OPERATION

c

You can repeat part of a CD (LOOP) and can "flash" the CD sound (FLASH)
during playback.

Play a CD.

Press and hold LOOP or FLASH at the point you want to
start the function.

repeat a selected part of a CD

LOOP on the remote

"flash" the CD sound

FLASH on the remote

To cancel the LOOP or FLASH function
Release the button.
The player returns to normal play.

Notes on CDs
• Before playing, clean the CD with a cleaning cloth. Wipe the CD from the

center out.

• Do not use solvents such as benzine, thinner, commercially available

cleaners or anti-static spray intended for vinyl LPs.

• Do not expose the CD to direct sunlight or heat sources such as hot air

ducts, nor leave it in a car parked in direct sunlight as there can be a
considerable rise in temperature inside the car.

• Do not stick paper or sticker on the CD, nor scratch the surface of the CD.
• After playing, store the CD in its case.

If there is a scratch, dirt or fingerprints on the CD, it may cause tracking
error.

Press Z PUSH OPEN/CLOSE down to open the CD
compartment and place a CD in the CD compartment.

c

*  The name of this button is PLAY MODE•MONO/ST for CFD-S22/S32,

PLAY MODE•MONO/ST ISS for CFD-S22L/S32L/922L.