Sony RDR-GX310 Manual
47
T
im
er R
ec
ord
ing
ord
ing
To scroll the list display by page (Page mode)
Press REPLAY
/
ADVANCE
while the
list display is turned on. Each time you press
REPLAY
REPLAY
/
ADVANCE
, the entire Timer List
changes to the previous/next page of timer
settings.
settings.
To turn off the Timer List
Press TIMER LIST or
O
RETURN.
z Hint
While recording, you cannot modify the timer setting for
the current recording, but you can extend the recording
duration of the recording time (page 42).
While recording, you cannot modify the timer setting for
the current recording, but you can extend the recording
duration of the recording time (page 42).
b
Notes
• Even if the timer is set, timer recordings cannot be
made while recording a program that has priority.
• Even if the timer is set for the same daily or weekly
program, the timer recording cannot be made if it
overlaps with a program that has priority. “
overlaps with a program that has priority. “
” will
appear next to the overlapped setting in the Timer List.
Check the priority order of the settings.
Check the priority order of the settings.
If the timer settings overlap, the program that was
set last has priority and will be recorded. A timer
recording of lower priority may be canceled, start
from the middle or stop midway through the
program.
You can change the priority of a program if
necessary.
set last has priority and will be recorded. A timer
recording of lower priority may be canceled, start
from the middle or stop midway through the
program.
You can change the priority of a program if
necessary.
When the timer settings overlap
The program set last has priority.
Example: You set the timer in order of A, B, and
C (setting C has first priority)
C (setting C has first priority)
If you give setting B priority over setting C, all of
program B will be recorded and program C is
recorded only after program B has ended.
program B will be recorded and program C is
recorded only after program B has ended.
If the end time of one recording and the start
time of another are the same
time of another are the same
The end of program A will be cut.
1
Press TIMER LIST.
The Timer List appears.
2
Select an overlapped timer setting, and
press ENTER.
press ENTER.
indicates that the timer setting is
overlapped by another timer setting.
3
Select “Check Overlap,” and press ENTER.
4
Select “Change,” and press ENTER.
Changing the priority of
overlapped settings
overlapped settings
7:00
7:00
9:00
10:30
A
9:00
11:00
A
B
C
C
10:30
B
will be cut off
Actual recording
7:00
9:00
11:00
A
B
C
7:00
9:00
10:00
A
B
10:30PM
TIMER LIST
10:00PM -10:15PM
SP
SP
SLP
SLP
4:00PM - 5:00PM
9:00PM -10:00PM
8:30PM - 9:30PM
Mon-Sat
Fri
10/29
Fri
10/29
Sat 10/30
4ch
25ch
3ch
125ch
Check Overlap
These timer settings overlap.
10/29 8:30PM - 9:30PM 25ch SP
10/29
9:00PM -10:00PM 3ch
Fri
Fri
SLP
Change
Close
Fri 10/29
9:00AM - 10:15AM 3ch SLP
Where do you want to move this timer setting?
Mon-Sat 10:00AM - 10:30AM 25ch SP
Change priority
Cancel
,continued