Sony SPP-D900 Manual
Getting Started
13
US
Getting Started
Notes
• If the local area code is already entered, it appears on the display in step 5. To
• If the local area code is already entered, it appears on the display in step 5. To
enter a different local area code, see “To change the local area code” below.
• Do not allow more than 20 seconds to elapse between each step of the
procedure.
Tips
• You may press Jog Dial instead of (PGM) in step 7.
• To check the current local area code, perform steps 1 to 5. The local area code
• You may press Jog Dial instead of (PGM) in step 7.
• To check the current local area code, perform steps 1 to 5. The local area code
appears on the display for about 20 seconds.
To change the local area code
1
Perform steps 1 to 5 on page 12.
The current local area code appears on the display.
2
Turn Jog Dial down to erase the current local area code.
3
Enter a new local area code using the dialing keys.
4
Press (PGM).
You will hear a long confirmation beep.
To erase the local area code
You can erase the local area code. Perform steps 1 and 2 above, then
press (PGM).
press (PGM).
The local area code will be erased, and you hear a long confirmation
beep.
beep.
5
Press Jog Dial.
”ENTER AREA CODE“ appears on the
display.
”ENTER AREA CODE“ appears on the
display.
6
Enter three digits of the local area code using the
dialing keys.
dialing keys.
7
Press (PGM).
You will hear a long confirmation beep.
You will hear a long confirmation beep.