Sony RDP-XA900iP Manual
13
US
1
Prepare for the following
devices.
devices.
• This unit
• Mac or PC
• Wireless LAN router/access point
• Network (LAN) cable (not supplied) if
• Mac or PC
• Wireless LAN router/access point
• Network (LAN) cable (not supplied) if
needed
2
Have your wireless network
name (SSID) and Security Key
(if applicable) available for
reference.
name (SSID) and Security Key
(if applicable) available for
reference.
Refer to the operating instructions of the
wireless LAN router/access point.
wireless LAN router/access point.
3
Connect the unit and the Mac or
PC using a network (LAN) cable
(not supplied). Then turn this
unit on.
PC using a network (LAN) cable
(not supplied). Then turn this
unit on.
Wait for about 4 minutes until the LINK
indicator lights up amber.
indicator lights up amber.
Tip
You can also perform this procedure
wirelessly. See “To connect wirelessly”
(page 14).
wirelessly. See “To connect wirelessly”
(page 14).
4
Access the [Sony Network
Device Setting] screen.
Device Setting] screen.
For Mac
Start Safari and select [Bonjour] under
[Bookmarks], then select [RDP-
XA900iP].
Start Safari and select [Bonjour] under
[Bookmarks], then select [RDP-
XA900iP].
For PC
Start the browser and input either of the
following URLs into the browser’s
address bar.
Start the browser and input either of the
following URLs into the browser’s
address bar.
• When using a network (LAN) cable
• When connecting wirelessly
5
Select the desired language
when the [Language Setup]
screen appears.
when the [Language Setup]
screen appears.
6
Select [Network Settings] from
the menu.
the menu.
Option 3: Wi-Fi Connection
using Access Point Scan
using Access Point Scan
SSID (Wireless Network Name)
Security Key (WEP or WPA key)
Network Settings