Sony SRS-X77 Manual

Page of 2
4-570-616-
13(1)
Personal Audio System
Listening to Music over Your Wi-Fi Network
SRS-X77
Wi-Fi Startup Guide
 Connecting the unit to your Wi-Fi network
Xperia
iPhone
WPS
Required items: Xperia™ or other Android smartphone, wireless router
Required items: iPhone/iPad/iPod touch, wireless router
Required item: Wireless router with WPS (AOSS) button
Use an Android smartphone such as an Xperia 
in which SongPal (free app) is installed to 
configure Wi-Fi settings of the unit. 
This method requires a Wi-Fi connection of 
the smartphone and a BLUETOOTH 
connection between the smartphone and the 
unit. The Wi-Fi setting information is sent 
from the smartphone to the unit via 
BLUETOOTH.
•  Some wireless routers have multiple SSIDs. 
Connect the unit and your Android 
smartphone to the same SSID.
Use an iPhone in which SongPal (free app) is 
installed to configure Wi-Fi settings of the 
unit. 
This method requires a Wi-Fi connection of 
the iPhone and a BLUETOOTH connection 
between the iPhone and the unit. The Wi-Fi 
setting information is sent from the iPhone to 
the unit via BLUETOOTH. 
•  Some wireless routers have multiple SSIDs. 
Connect the unit and your iPhone to the same 
SSID.
Configure Wi-Fi settings of the unit with a 
push of each WPS (AOSS) button on the 
wireless router and the unit.
•  To check if your wireless router is compatible 
with WPS (Wi-Fi Protected Setup™), refer to 
the operating instructions of your router.
Preliminary steps:
  Connect your smartphone to your Wi-Fi network.
  Record the SSID and password of your router 
that your smartphone is connecting to in the 
following spaces.
For details, refer to the operating instructions of your 
router.
SSID:
Password:
  Install SongPal on your smartphone.
Search for 
SongPal on Google 
Play™
Preliminary steps:
  Confirm that your iPhone is 
connected to your Wi-Fi 
network.
  Install SongPal on your iPhone.
Search for 
SongPal on the 
App Store
Place the unit close to your wireless 
router.
Press the 
/ (on/standby) button to 
turn on the unit.
Flashing
Slow 
flashing
The 
/ (on/standby) indicator lights up in green.
Go to the next step when the LINK indicator begins to 
flash slowly (once per 3 seconds). In some cases, this 
slow flashing may take about 4 or 5 minutes to begin.
Press the 
/ (on/standby) button to 
turn on the unit.
Flashing
Slow 
flashing
The 
/ (on/standby) indicator lights up in green.
Go to the next step when the LINK indicator begins to 
flash slowly (once per 3 seconds). In some cases, this 
slow flashing may take about 4 or 5 minutes to begin.
Press the 
/ (on/standby) button to 
turn on the unit.
Flashing
Slow 
flashing
The 
/ (on/standby) indicator lights up in green.
Go to the next step when the LINK indicator begins to 
flash slowly (once per 3 seconds). In some cases, this 
slow flashing may take about 4 or 5 minutes to begin.
Press and hold the WPS button of the 
unit until it beeps (about 2 seconds).
The WPS button is on the rear of the unit.
Within 90 seconds, press the WPS 
button*
3
 of the router.
Depending on the wireless router, press and hold the 
WPS button for a few seconds. For details, refer to the 
operating instructions of your router.
*
3
  The WPS button may be called “AOSS button” depending 
on the wireless router.
Check that the   
(BLUETOOTH) indicator
 
is lit.
Flashing
Lit
When a BLUETOOTH connection is established, the   
(BLUETOOTH) indicator stops flashing and stays lit.
Check that the   
(BLUETOOTH) indicator
 
is lit.
Flashing
Lit
When a BLUETOOTH connection is established, the   
(BLUETOOTH) indicator stops flashing and stays lit.
Check that the LINK indicator lights up in 
orange.
Flashing
Lit
When the indicator stays lit, the Wi-Fi connection is 
established. Depending on the environment, it may take 
more than 1 minute.
When the Wi-Fi connection fails, the LINK indicator flashes in 
red. In this case, repeat the procedure from step 2.
Configure Wi-Fi settings following the 
SongPal instructions.
If password entry is required on 
the display, select the SSID and 
enter the password recorded in 
step 1 - 
.
The screen on the right is 
displayed.
Configure Wi-Fi settings following the SongPal instructions.
Check that the LINK indicator lights up in 
orange.
Flashing
Lit
When the indicator stays lit, the Wi-Fi connection is 
established. Depending on the environment, it may take 
more than 1 minute.
When the Wi-Fi connection fails, the LINK indicator flashes in 
red. In this case, repeat the procedure from step 2.
Check that the LINK indicator lights up 
in orange.
Flashing
Lit
When the indicator stays lit, the Wi-Fi connection is 
established. Depending on the environment, it may 
take more than 1 minute.
When the Wi-Fi connection fails, the LINK indicator flashes 
in red. In this case, repeat the procedure from step 2.
Make a BLUETOOTH connection between the unit and iPhone.
Make a BLUETOOTH connection between 
the unit and smartphone.
If your smartphone does not support the NFC function, 
see 
 to  on the right.
  Tap and start up [SongPal] on your 
smartphone.
Follow the on-screen instructions.
  Touch the N-Mark on the unit with the 
smartphone.
Touch and hold until 
the smartphone 
responds.
Pairing is completed in about 1 minute.
  Tap the   (BLUETOOTH)   PAIRING button of the 
unit once.
The   (BLUETOOTH) indicator begins to flash 
quickly.*
2
*
2
  The first time you tap the   (BLUETOOTH)   PAIRING 
button after purchasing this unit, the   (BLUETOOTH) 
indicator flashes quickly. To pair with another device, tap 
and hold the   (BLUETOOTH)   PAIRING button until it 
beeps.
  Search for the unit on the iPhone.
Tap [Settings] 
 [Bluetooth].
Turn on BLUETOOTH.
Tap [
SRS-X77].
Non-NFC compatible smartphone
  Tap [SRS-X77] on your 
smartphone.
*
1
  The first time you tap the   (BLUETOOTH)   PAIRING 
button after purchasing this unit, the   (BLUETOOTH) 
indicator flashes quickly. To pair with another device, 
tap and hold the   (BLUETOOTH)   PAIRING button 
until it beeps.
  Set the BLUETOOTH function of the 
smartphone to on.
  Tap and start up 
SongPal, then [Open 
the Bluetooth setting 
screen].
  Tap the   (BLUETOOTH)   PAIRING button 
of the unit once.
The   (BLUETOOTH) indicator begins to flash 
quickly.*
1
If the Wi-Fi connection fails
You can use a PC browser to configure Wi-Fi settings of the unit. Connect the unit to your PC using a 
commercially-available network (LAN) cable.
For details, refer to the Operating Instructions, “Listening to music via a Wi-Fi network”.
This document introduces how to play music after connecting this unit to your Wi-Fi network.
A Wi-Fi network enables you to easily enjoy music stored in wireless devices in your home, such as a PC or smartphone/iPhone. For other connection or listening methods, refer to Help Guide (indicated on the right).
First
  Set up the unit as follows.
Make sure that a LAN cable is 
not connected. A wired and 
wireless connection cannot be 
used at the same time.
Push
3
  Set the antenna in the upright position.
2
  Plug the unit to an AC outlet 
with the AC adaptor to charge.
1
  Set the NETWORK 
OFF/ON switch to ON.
Choose your device or software to play music, then go to 
 Listening 
to music with the unit” overleaf
.
PC 
(Media Go)
Set the music stored in a PC to share and listen to it by 
using Media Go.
PC 
(iTunes)
PC 
(Windows Media Player)
Smartphone 
(SongPal app)
Listen to music in your smartphone/iPhone/iPad/iPod 
touch by operating SongPal.
Xperia 
(Music app) 
iPhone/iPad/iPod touch
Choose a Wi-Fi connection method depending on your device, 
then go to 
 Connecting the unit to your Wi-Fi network” below
.
Xperia
Use an Android smartphone in which SongPal (free app) is 
installed to configure the Wi-Fi settings of the unit.
iPhone
Use an iPhone/iPad/iPod touch in which SongPal (free app) 
is installed to configure the Wi-Fi settings of the unit.
WPS
Use a wireless router with a WPS (AOSS) button to configure 
the Wi-Fi settings of the unit with a push of the button.
PC
Configure the Wi-Fi settings using a browser of a PC. Refer to the 
Operating Instructions of the separate document, “Listening to music 
via a Wi-Fi network”.
Documents provided
Wi-Fi Startup Guide (this document)
Explains how to listen to music stored in your PC or other device over 
your Wi-Fi network.
Operating Instructions (separate document)
Explains important safety information, BLUETOOTH connection 
method, troubleshooting, etc.
Help Guide (web document for a PC/smartphone)
Explains details about the unit; network and BLUETOOTH connection 
method with various devices, etc.
http://rd1.sony.net/help/speaker/srs-x77/h_zz/
  If [Share Wi-Fi settings?] is displayed, tap [Allow].
The screen on the right is 
displayed.
  Tap and start up [SongPal] on your 
iPhone.
Follow the on-screen instructions.
  When the screen on the right 
is displayed, tap [OK].
See overleaf to play back
See overleaf to play back
See overleaf to play back
Continued: “ 
 Listening to music with the unit” overleaf