Sony SRS-X55 Manual

SRS-X55 [UC7] (US, CaFR, LaES)  4-565-693-11(2)

©2015 Sony Corporation   Printed in China

SRS-X55

Personal Audio System
Système audio personnel
Sistema de audio personal

 

Startup Guide

 

Guide de démarrage

 

Guía de inicio

Provides you with instructions on how to connect the unit with 
BLUETOOTH devices and basic operations.

Provides you with precautions and product specifications.

Read the Help Guide on your computer or smartphone, when you want 
to know how to use the unit in greater detail. The Help Guide also 
contains a troubleshooting guide which provides you with remedies for 
the problems you might encounter.

URL: 

Two-dimensional code: 

This unit has a built-in lithium-ion rechargeable battery. Charge the battery 
before using the unit for the first time.

AC adaptor 
(supplied)

DC IN

Lit (orange)

Charging starts when the unit is connected to an AC outlet via the AC 
adaptor, and the CHARGE indicator lights up orange. Charging is 
completed in about four hours and the indicator goes off.

Select your case from the 3 pairing types, below. BLUETOOTH devices need to be 
“paired” with each other beforehand.

Pairing and connecting with a BLUETOOTH 
device

The unit can be paired with up to eight BLUETOOTH devices. When pairing with 
two or more BLUETOOTH devices, perform the following pairing procedure for 
each device.

1

/ (power) button to turn on this unit.

The 

/ (power) indicator lights up green.

Lit  

(green)

2

The   (BLUETOOTH) indicator begins to flash white.

Flashing 

(white)

When you use the BLUETOOTH function for the first time, and when you 
only tap the   (BLUETOOTH)   PAIRING button, the   (BLUETOOTH) 
indicator will begin to flash white quickly and the unit enters pairing mode 
automatically.

3

The unit enters pairing mode.

Fast flashing 

(white)

4

When a list of detected devices appears on the display of the BLUETOOTH 
device, select “SRS-X55.”
If passkey input is required on the display of a BLUETOOTH device, input 
“

0000

.”

5

When the BLUETOOTH connection is established, the   (BLUETOOTH) 
indicator on the unit stays lit.

Connecting with a paired BLUETOOTH device

1

2

The   (BLUETOOTH) indicator begins to flash white.

3

When the BLUETOOTH connection is established, the   (BLUETOOTH) 
indicator on the unit stays lit.

Connecting with a smartphone by One-
touch (NFC)

By touching the unit with a smartphone, the unit is turned on automatically and 
then proceeds to pairing and BLUETOOTH connection.

NFC-compatible smartphones with Android™ 2.3.3 or later installed

NFC (Near Field Communication) is a technology enabling short-range wireless 
communication between various devices, such as smartphones and IC tags. 
Thanks to the NFC function, data communication - for example, BLUETOOTH 
pairing - can be achieved easily by simply touching NFC compatible devices 
together (i.e., at the N-Mark symbol or location designated on each device).

1

For details, refer to the operating instructions supplied with the smartphone.
• If your smartphone OS is Android 2.3.3 or later, and less than Android 4.1: 

proceed to step 2.

• If your smartphone OS is Android 4.1 or later: proceed to step 4.

2

“NFC Easy Connect” is a free Android app you can download from Google 
Play™.
Download the app by searching for “NFC Easy Connect” or access it by 
using the following two-dimensional code. Fees may be charged for 
downloading the app.

To download by the two-dimensional code, use a 
two-dimensional code reader app.

• The app may not be available in some countries and/or regions.

3

Make sure that the app screen is displayed.

4-565-693-

11(2)

4

Unlock the screen of the smartphone beforehand.
Keep touching the smartphone on the N marked part of the unit until the 
smartphone responds. If the unit is off, it will turn on when the 
smartphone touches it.

Smartphone responds 
(unit recognized)

Follow the on-screen instructions to establish the connection.
When the BLUETOOTH connection is established, the   (BLUETOOTH) 
indicator on the unit stays lit.
To disconnect, touch the unit with the smartphone again.

If you cannot connect the unit, try the following.
• Start the app on the smartphone, and move the smartphone slowly over the N 

marked part of the unit.

• If the smartphone is in a case, remove it from the case.
• Make sure that the app screen is displayed on the smartphone.

Operate the unit after making BLUETOOTH connection with your BLUETOOTH device.

Listening to music

Profile: A2DP, AVRCP

Start playback on the BLUETOOTH device, and adjust the volume.

Set the volume on the connected device or with the VOL –/+ buttons on the 
unit.

• For details about playback through connection via the AUDIO IN jack, refer to the 

Help Guide.

Making a call/Receiving a call

Profile: HSP, HFP

Microphone

Operate your smartphone to make a call.

To terminate a call, press the 

 button on the unit.

Press the   button on the unit when an incoming call arrives.

Operate in the same way when an incoming call arrives while you are listening 
to music.

• The BLUETOOTH® word mark and logos are owned by the Bluetooth SIG, Inc. and any 

use of such marks by Sony Corporation is under license.

• The N Mark is a trademark or registered trademark of NFC Forum, Inc. in the United 

States and in other countries.

• Android and Google Play are trademarks of Google Inc.
• Other trademarks and trade names are those of their respective owners.

Vous fournit les instructions pour connecter l’appareil avec des 
périphériques BLUETOOTH ainsi que les opérations de base.

Vous fournit les précautions et les spécifications du produit.

Lisez le Manuel d’aide sur votre ordinateur ou votre téléphone 
intelligent lorsque vous voulez avoir plus de détails sur l’utilisation de 
l’appareil. Le Manuel d’aide contient également un guide de 
dépannage qui vous fournit des solutions aux problèmes que vous 
pourriez rencontrer.

URL : 

Code en deux dimensions : 

L’appareil est équipé d’une pile rechargeable intégrée au lithium-ion. Chargez la 
pile avant d’utiliser l’appareil pour la première fois.

Adaptateur CA 
(fourni)

DC IN

S’allume 
(orange)

Le chargement démarre lorsque l’appareil est branché à une prise de 
courant via l’adaptateur CA, et le témoin CHARGE (orange) s’allume. Le 
chargement dure environ 4 heures, puis le témoin s’éteint.

Sélectionnez votre cas parmi les 3 types de pairage ci-dessous. Il est nécessaire au 
préalable de procéder au « pairage » des périphériques BLUETOOTH.

Pairage et connexion avec un périphérique 
BLUETOOTH

Cet appareil peut être pairé avec un maximum de huit périphériques 
BLUETOOTH. Voici la procédure de pairage pour chacun des périphériques lors 
du pairage de deux périphériques BLUETOOTH ou plus.

1

/ (alimentation) pour mettre 

Le témoin 

/ (alimentation) s’allume en vert.

S’allume 

(vert)

2

Le témoin   (BLUETOOTH) se met à clignoter en blanc.

Clignote 

(blanc)

Lorsque vous utilisez la fonction BLUETOOTH pour la première fois et que 
vous touchez simplement la touche   (BLUETOOTH)   PAIRING, le témoin 

 (BLUETOOTH) commencera à clignoter rapidement en blanc et l’appareil 

passera automatiquement en mode de pairage.

3

Le mode de pairage de l’appareil est activé.

Clignote rapidement 

(blanc)

4

Lorsque la liste de périphériques détectés apparaît sur l’écran du 
périphérique BLUETOOTH, sélectionnez « SRS-X55 ».
Si un code est demandé sur l’écran d’un périphérique BLUETOOTH, 
saisissez « 

0000

 ».

5

Lorsque l’appareil est connecté au périphérique BLUETOOTH, le témoin 

 (BLUETOOTH) s’allume.