Sony SS-CN5000P Manual

The model and serial numbers are located on the
rear of the unit. Record the serial number in the
space provided below. Refer to them whenever
you call upon your Sony dealer regarding this
product.

Model No.__________Serial No.__________

• Avoid driving the speaker system

continuously with a wattage exceeding the
maximum input power of this speaker system.

• Before connecting, turn off the amplifier to

avoid damaging the speaker system.

• Make sure the plus (+) and the minus (–)

terminals on the speaker are matched to the
corresponding plus (+) and minus (–)
terminals on the amplifier.

If you encounter color irregularity on a
nearby TV screen
This speaker system is magnetically shielded to
allow it to be installed near a TV set. However,
color irregularities may still be observed on
certain types of TV sets.
If color irregularity is observed...
Turn off the TV set, then turn it on again after 15
to 30 minutes.
If color irregularity is observed again...
Place the speaker away from the TV set.



2007 Sony Corporation   

Printed in Malaysia

–

+

2-898-925-11(1)

(1)

Speaker system

2-way, magnetically
shielded

Speaker units

Woofer:  13 cm (5 

1

/

8

 in.),

cone type 

×

 2

Tweeter:  2.5 cm (1 in.),
balanced dome type

Enclosure type

Bass reflex

Rated impedance

8 ohms

Power handling capacity Maximum input power:

150 watts

Sensitivity level

89 dB (1 W, 1 m)

Frequency range

85 Hz - 50,000 Hz

Dimensions (w/h/d)

Approx. 400 

×

 170 

×

216 mm
(15 

3

/

4

 

×

 6 

3

/

4

 

×

 8 

1

/

2

 in.)

including front grille

Mass

Approx. 4.8 kg
(10 lb 10 oz)

Supplied accessories

Speaker cord (1)
Foot Pads (4)

Design and specifications are subject to change
without notice.