Sony RM-NX7000 Manual
96
Customizing the Component display (COMPONENT EDIT)
Continued
To erase all learned data set to the keys/buttons in a
component
component
You can erase all learned data by specifying the component on the Remote
Commander. This operation erases all learned data you programmed to the
function keys/buttons for a specific component.
Commander. This operation erases all learned data you programmed to the
function keys/buttons for a specific component.
Note
Keys that refer to another key will not function properly if the reference key (for Alias or
macro) is deleted.
Keys that refer to another key will not function properly if the reference key (for Alias or
macro) is deleted.
1
Perform steps 1 to 3 in “Deleting a function key (DELETE)” (page
92).
92).
2
Press the Component key for 2
seconds or longer.
Press the Component key whose learned
data you want to erase for 2 seconds or the
confirmation display of erasing the remote
control signal appears.
seconds or longer.
Press the Component key whose learned
data you want to erase for 2 seconds or the
confirmation display of erasing the remote
control signal appears.
3
Press the [YES] key.
The deletion of learned data begins. While
deleting learned data, a message appears.
When the deletion is complete, the display
returns to step 2.
If you press the [NO] key, the display
returns to step 2 without deleting.
The deletion of learned data begins. While
deleting learned data, a message appears.
When the deletion is complete, the display
returns to step 2.
If you press the [NO] key, the display
returns to step 2 without deleting.
4
To finish all settings, press the COMMANDER OFF button for 2
seconds or longer.
The display returns to the Home display. Or press the [EXIT] key repeatedly
until the Home display is shown.
seconds or longer.
The display returns to the Home display. Or press the [EXIT] key repeatedly
until the Home display is shown.