Sony MEX-M70BT Manual
8
GB
Detaching the Front Panel
You can detach the front panel of this unit to
prevent theft.
prevent theft.
1
Press and hold OFF
.
The unit is turned off.
2
Press the front panel release button
,
then remove the panel by pulling it
towards you.
towards you.
Caution alarm
If you turn the ignition switch to the OFF position
without detaching the front panel, the caution
alarm will sound for a few seconds. The alarm will
only sound if the built-in amplifier is used.
without detaching the front panel, the caution
alarm will sound for a few seconds. The alarm will
only sound if the built-in amplifier is used.
Serial numbers
Make sure the serial numbers on the bottom of the
unit and the back of the front panel are matched
correctly. Otherwise you cannot make BLUETOOTH
pairing, connection and disconnection by NFC.
unit and the back of the front panel are matched
correctly. Otherwise you cannot make BLUETOOTH
pairing, connection and disconnection by NFC.
Switching the FM/AM Tuning
Step
Step
Set the FM/AM tuning step of your country. This
setting appears when this unit is turned off.
setting appears when this unit is turned off.
1
Press and hold SELECT.
The setup display appears.
2
Rotate the control dial to select [TUNER-
STP], then press it.
STP], then press it.
3
Rotate the control dial to select from
[50K/9K], [100K/10K] or [200K/10K], then
press it.
[50K/9K], [100K/10K] or [200K/10K], then
press it.
Setting the Clock
1
Press MENU, rotate the control dial to
select [GENERAL], then press it.
select [GENERAL], then press it.
2
Rotate the control dial to select [CLOCK-
ADJ], then press it.
ADJ], then press it.
The hour indication flashes.
3
Rotate the control dial to set the hour
and minute.
and minute.
To move the digital indication, press SEEK +/–.
4
After setting the minute, press MENU.
The setup is complete and the clock starts.
To display the clock, press DSPL.
Preparing a BLUETOOTH Device
You can enjoy music, or perform handsfree calling,
by connecting a suitable BLUETOOTH device. For
details on connecting, refer to the operating
instructions supplied with the device.
Before connecting the device, turn down the
volume of this unit; otherwise, loud sound may
result.
by connecting a suitable BLUETOOTH device. For
details on connecting, refer to the operating
instructions supplied with the device.
Before connecting the device, turn down the
volume of this unit; otherwise, loud sound may
result.
When connecting a BLUETOOTH device (cellular
phone, audio device, etc.) for the first time, mutual
registration (called “pairing”) is required. Pairing
enables this unit and other devices to recognize
each other.
phone, audio device, etc.) for the first time, mutual
registration (called “pairing”) is required. Pairing
enables this unit and other devices to recognize
each other.
1
Place the BLUETOOTH device within 1 m
(3 ft) of this unit.
(3 ft) of this unit.
2
Press CALL, rotate the control dial to
select [PAIRING], then press it.
select [PAIRING], then press it.
flashes.
The unit enters pairing standby mode.
3
Perform pairing on the BLUETOOTH
device so it detects this unit.
device so it detects this unit.
Getting Started
Attaching the front panel
Pairing and connecting with a
BLUETOOTH device
BLUETOOTH device