Sony GV-D800 Manual

Page of 76
41
Editing
Dubbing only desired scenes – Digital program editing
Confirming the other (recording) VCR operation
(1) Insert a recordable tape into the other (recording) VCR, then set to recording
pause.
(2) Turn the SEL/PUSH EXEC dial to select IR TEST, then press the dial.
(3) Turn the SEL/PUSH EXEC dial to select EXECUTE, then press the dial.
If the other (recording) VCR starts recording, the setting is correct.
When finished, the indicator changes to COMPLETE.
If the other (recording) VCR operates correctly
Skip to step 3 on page 43.
If the other (recording) VCR does not operate correctly
•Set the IR SETUP code, or select the button to cancel the recording pause on the other
(recording) VCR.
•Place your (playback) VCR at least 12 in. (30 cm) away from the other (recording)
VCR.
•Refer to the operating instructions of the other (recording) VCR.
2
3
ED I T  SET
   CONTROL
   ADJ   TEST
     CUT - I N
     CUT -OUT
     I R    SETUP
  PAUSEMODE
     I R    TEST
     RETURN
 [MENU] : END
ENGAGE
REC PAUSE
RETURN
EXECUTE
OTHERS
ED I T  SET
   CONTROL
   ADJ   TEST
     CUT - I N
     CUT -OUT
     I R    SETUP
  PAUSEMODE
     I R    TEST
     RETURN
 [MENU] : END
 
COMPLETE
OTHERS