Sony SLV-N70 Manual

Page of 112
8
Hookups
Step 3 : Hookups
Selecting the best hookup option
There are many ways in which your VCR can be hooked up.  To hook up your VCR 
so that it works best for you, first scan through the table below.  Then use the 
accompanying diagrams and procedures on the following pages to set up your VCR.
If your TV has audio/video inputs, refer to pages 9 and 10 for audio/video (A/V) 
hookup.  Then follow one of the hookups below.  For hookup 1 or 2, use the Sony 
RM-CM101 Cable Mouse (cable box controller) (not supplied).
For SLV-N80 only
For both SLV-N80 and N70
After you’ve completed the connections, follow the instructions for setup.  During 
setup, if you need more details on the procedure described, page numbers are 
provided where you can find complete, step-by-step instructions.
After you’ve completed the setup, you’re ready to use your VCR.  Procedures differ 
depending on the hookup you used.  For an overview, refer to “Quick reference to 
using the VCR” on the back cover.
Before you get started
• Turn off the power to all equipment.
• Do not connect the AC power cords until all of the connections are completed.
• Be sure you make connections firmly.  Loose connections may cause picture 
distortion.
• If your TV doesn’t match any of the examples provided, see your nearest Sony 
dealer or qualified technician.
If you have
Use
Refer to
A cable box that is compatible with the 
Cable Mouse
Hookup 1
A digital broadcast service’s digital 
satellite receiver that is compatible with 
the Cable Mouse
Hookup 2
If you have
Use
Refer to
No cable box or cable box with only a few 
scrambled channels
Hookup 3
Antenna only, no cable TV
Hookup 4
Cable box with many scrambled channels
Hookup 5
Cable box with only a few scrambled 
channels and you are using an A/B switch 
Hookup 6