Sony MZ-G750DPC Manual
27
Recording with analog input (line cable
required)
required)
The sound will sent from the connected equipment as analog signal
but will be recorded digitally on the disc.
but will be recorded digitally on the disc.
1
Press and slide REC to the right.
REC indication lights up in the display and recording starts.
REC indication lights up in the display and recording starts.
2
Play the source you want to record.
For recording operations, see “Recording an MD right away!”
(page 15). To record from a portable CD player, set the CD
player to pause and then start recording.
For recording operations, see “Recording an MD right away!”
(page 15). To record from a portable CD player, set the CD
player to pause and then start recording.
LINE IN (OPTICAL) jack is for both digital and analog input
The recorder automatically recognizes the type of line cable and switches to
digital or analog input.
digital or analog input.
Note
If you temporarily stop a recording operation by pressing X, a track mark will
be added at that point when you press X again to resume recording. The
recording continues from on a new track.
be added at that point when you press X again to resume recording. The
recording continues from on a new track.
to LINE IN
(OPTICAL)
(OPTICAL)
Line cable
(RK-G129,
not supplied)*
(RK-G129,
not supplied)*
CD player,
cassette recorder,
etc.
cassette recorder,
etc.
to LINE OUT
L (white)
R (red)
∗ Use the connecting cords without an attenuator. To connect
to a portable CD player having a stereo mini-jack, use the
RK-G136 connecting cord (not supplied).
RK-G136 connecting cord (not supplied).