Sony ICD-BP150VTP Manual

Page of 222
1 2
Using Portable Recorders (Preferred and higher)
Dragon NaturallySpeaking User’s Guide
151
Correcting mistakes
After Dragon NaturallySpeaking transcribes your dictation, make sure you correct 
any mistakes. To help you check for mistakes, you can play back your recorded 
voice as you read what Dragon NaturallySpeaking transcribed. Listening to your 
dictation as you read the transcription will help you identify misrecognized words or 
phrases. For more information, see “Correcting and Editing” on page 41
Using the Dragon NaturallyMobile 
recorder as a microphone
If you have a Dragon NaturallyMobile recorder, you can use it as a microphone 
when it is connected to the computer. This feature is convenient for editing your 
transcribed text by voice.
To use the recorder as a microphone:
1
Open the user you created for the Dragon NaturallyMobile recorder, if it is not 
already open.
2
Make sure the recorder is connected to the serial port of your computer.
3
Click the Microphone button on the DragonBar so the microphone is on ( 
 ).
4
Wait until the recorder display reads “Mic On.” This takes about two or three 
seconds after you click the Microphone button.
5
Begin speaking, holding the built-in microphone of the recorder almost 
touching the corner of your mouth and a bit to the side. Do not hold the 
recorder so that the microphone is directly in front of your mouth.
6
When you have finished, click the Microphone button again so the microphone 
is off. 
 Turning off the microphone in this way does not turn off the recorder. To conserve your 
batteries, turn off the recorder by pressing the Power button.
NOTE