Sony MZ-R900 Manual
22
-GB
Recording with analog
input (line cable
required)
input (line cable
required)
The sound will be sent from the
connected equipment as analog signal but
will be recorded digitally on the disc.
connected equipment as analog signal but
will be recorded digitally on the disc.
1
Insert a recordable MD, and then
press and slide REC to the right.
“ REC” and the REC indicator light
up in the display and the recording
starts.
press and slide REC to the right.
“ REC” and the REC indicator light
up in the display and the recording
starts.
2
Play the source you want to record.
For other recording operations, see
“ Recording an MD right away!”
(page 16).
For other recording operations, see
“ Recording an MD right away!”
(page 16).
z
LINE IN (OPT) jack is for both digital and
analog input.
The recorder automatically recognizes the type
of line cable and switches to digital or analog
input.
analog input.
The recorder automatically recognizes the type
of line cable and switches to digital or analog
input.
Note
If you temporarily stop a recording operation
by pressing X, a track mark will be added at
that point when you press X again to resume
recording. The recording continues from on a
new track.
by pressing X, a track mark will be added at
that point when you press X again to resume
recording. The recording continues from on a
new track.
CD player,
cassette recorder,
etc. (source)
cassette recorder,
etc. (source)
R (red)
L (white)
Line cable*
to LINE IN (OPT)
to LINE OUT
REC
REC indicator
∗ Use the connecting cords without an
attenuator. To connect to a portable CD
player having a stereo mini-jack, use
the RK-G136 connecting cord. For
more information on connecting cords,
see “ Optional accessories” (page 68).
player having a stereo mini-jack, use
the RK-G136 connecting cord. For
more information on connecting cords,
see “ Optional accessories” (page 68).