Sony ICD-SX700D Manual

Page of 134
ICD-SX700  4-127-576-11(1)
1
GB
Disconnecting the IC 
recorder from your 
computer
Follow the procedures below; otherwise, 
data may be damaged.
1
  Make sure that the operation 
indicator is not flashing.
2
  Disconnect the USB connecting 
cable connected to the IC recorder 
from the USB connector of the 
computer.
On the Windows screen, left-click 
“Safely Remove Hardware” on the 
taskbar, and click “Safely remove USB 
Mass Storage Device.” 
On the Macintosh screen, drag the “IC 
RECORDER” on the desktop to “Trash” 
and drop it there.
For details on disconnecting the 
IC recorder, refer to the operating 
instructions supplied with your 
computer.
Tips
You can charge the rechargeable batteries 
by connecting the IC recorder to an AC 
outlet using a USB AC adaptor (not supplied) 
(page 124).
When replacing the batteries, messages 
recorded or alarm settings are not erased 
even when you remove the batteries.
When replacing the batteries, the clock 
continues moving for a certain period of 
time after you remove the batteries.
Notes
While “
” or “
” is flashing instead 
of the battery indicator, you cannot charge 
the batteries. Charge the batteries in an 
environment with a temperature of 5 °C 
- 35 °C (41 °F - 95 °F).
If “USB CHARGE” in the “DETAIL MENU” 
menu is set to “OFF,” you cannot charge the 
batteries using your computer. Set “USB 
CHARGE” to “ON” (page 91).
During playback using the internal speaker, 
you cannot charge the batteries.
When you use the IC recorder with 
rechargeable batteries, the battery indicator 
may not light fully.