Sony MDS-JB940 Manual
11
GB
Hooking up the audio components
Gettin
g
Sta
rted
Hooking up the audio components
A
Audio connecting cords (2) (supplied)
When connecting an audio connecting cord, be sure to match the
color-coded pins to the appropriate jacks: white (left) to white
and red (right) to red.
color-coded pins to the appropriate jacks: white (left) to white
and red (right) to red.
B
Optical cables (3) (only one supplied)
•
When connecting an optical cable, take the caps off the
connectors and insert the cable plugs straight in until they click
into place.
connectors and insert the cable plugs straight in until they click
into place.
•
Do not bend or tie the optical cables.
C
Coaxial digital connecting cables (2) (not supplied)
•
Turn off the power of all components before making any
connections.
connections.
•
Do not connect any AC power cord until all the
connections are completed.
connections are completed.
•
Be sure the connections are firm to prevent hum and
noise.
noise.
A
C
B
D
CONTROL A1
ΙΙ
AC power cord
1) Digital equipment with a DIGITAL OUT connector only
2) Digital equipment with both DIGITAL IN and OUT connectors
2) Digital equipment with both DIGITAL IN and OUT connectors
Amplifier, etc.
CD player, DBS tuner, etc.
Digital
amplifier, DAT deck, MD deck, etc.
to a wall outlet
Required cords
White (L)
Red (R)
White (L)
Red (R)
Hookup considerations
Jacks (connectors) for connecting audio
components
components
Connect
To the
Amplifiers
ANALOG IN/OUT jacks
CD players or DBS tuners
DIGITAL COAXIAL IN jack
or DIGITAL OPTICAL IN
or DIGITAL OPTICAL IN
1)
connector
1) There is no distinction of IN1 and IN2 connectors.
Digital amplifiers, DAT decks,
or another MD deck
or another MD deck
DIGITAL COAXIAL IN/OUT
jacks or DIGITAL OPTICAL
IN
jacks or DIGITAL OPTICAL
IN
/OUT connectors