Sony LF-V30 Manual

Sett

ing Up

the

Loca

tionF

ree®

Pla

Setting Up the LocationFree® Player

You can adjust settings for the on-screen remote
control that will be used to operate video devices
such as VCR, DVR, set-top box, and DVD player,
connected to the Base Station.

To adjust these settings, you must first save
remote control data on a Memory Stick Duo™
(

1 page 16).

For information on connecting the IR Blaster to
video device(s,) refer to the Operating
Instructions of the Base Station.

Check that you have inserted a
Memory Stick Duo™ that contains
remote control data in the PSP

system.

Select

from the LocationFree®

Player control panel (

1 page 15), and

then press the

button.

Select [Remote Control Settings], and
then press the

button.

The setting screen for the remote control is
displayed.

Select [Video 1] or [Video 2] for the
connected device you want to use the
remote control for, and then press the

button.

Tips

• Under [Version Information], you can check

the version number of the remote control data
that is saved on the Memory Stick Duo™.

• You can set only one remote control each for

[Video 1] and [Video 2] in the PSP

system.

You cannot however set multiple remote
controls for either setting.

Select the manufacturer of the
connected device, and then press the
right button.

Tip

To select the remote control data learned by LFA-
PC30/LFA-PC20, copy the remote control data
following the instructions on "Using the learning
remote control data" (

1 page 17), and then

select [Custom Remote] as the manufacturer.

Settings for
Watching TV or
Video

Remote Control Settings