Sony HCD-FX900W Manual
84
US
x [DISTANCE (SURROUND)]
The default distance setting for the speakers in
relation to the listening position is shown below.
When you set the distance using the Quick Setup
(page 21), the settings is automatically
displayed.
relation to the listening position is shown below.
When you set the distance using the Quick Setup
(page 21), the settings is automatically
displayed.
Be sure to change the value in the Setup Display
when you move the speakers.
when you move the speakers.
* When you perform the Quick Setup (page 21), the
default settings are changed.
** 0.0 to 6.9 meters for North American models.
Note
• When you set the distance, the sound cuts off for a
moment.
• Depending on the input stream, the [DISTANCE]
setting may not be effective.
• When the speaker distance setting is not in the
recommended range,
/
** m is displayed (**
being the number).
indicates over the
recommended distance.
indicates below.
x [LEVEL (FRONT)]
You can vary the level of front speakers as
follows. Be sure to set [TEST TONE] to [ON]
for easy adjustment.
follows. Be sure to set [TEST TONE] to [ON]
for easy adjustment.
x [LEVEL (SURROUND)]
You can vary the level of surround speakers as
follows. Be sure to set [TEST TONE] to [ON]
for easy adjustment.
follows. Be sure to set [TEST TONE] to [ON]
for easy adjustment.
To adjust the volume of all the
speakers at one time
speakers at one time
Press VOLUME +/– on the system, or press
VOLUME +/– on the remote.
VOLUME +/– on the remote.
x [TEST TONE]
The speakers will emit a test tone to adjust
[LEVEL (FRONT)] and [LEVEL
(SURROUND)].
[LEVEL (FRONT)] and [LEVEL
(SURROUND)].
Adjusting the speaker level by
using the test tone
using the test tone
1
Press
DISPLAY when the system is
in stop mode.
The Control Menu appears.
2
Press
X/x to select
[SETUP],
then press
.
The options for [SETUP] appear.
3
Press
X/x to select [CUSTOM], then
press .
The Setup Display appears.
[L/R]
3.0 m/10 ft
3.0 m/10 ft
*
(appears when you
set [SURROUND]
to [YES] in the
[SIZE] setting.)
set [SURROUND]
to [YES] in the
[SIZE] setting.)
Surround speaker distance from
the listening position can be set in
0.2 meter (1 ft) increments from
0.0 to 7.0 meters** (0 to 23 ft).
the listening position can be set in
0.2 meter (1 ft) increments from
0.0 to 7.0 meters** (0 to 23 ft).
[L/R]
0.0 dB
0.0 dB
Set this between –15.0 dB and
+10.0 dB in 1.0 dB increments.
+10.0 dB in 1.0 dB increments.
[CENTER]
0.0 dB
(appears when you
set [CENTER] to
[YES] in the [SIZE]
setting.)
0.0 dB
(appears when you
set [CENTER] to
[YES] in the [SIZE]
setting.)
Set this between –15.0 dB and
+10.0 dB in 1.0 dB increments.
+10.0 dB in 1.0 dB increments.
[SUBWOOFER]
0.0 dB
0.0 dB
Set this between –15.0 dB and
+10.0 dB in 1.0 dB increments.
+10.0 dB in 1.0 dB increments.
[L/R]
0.0 dB
(appears when
you set
[SURROUND] to
[YES] in the
[SIZE] setting.)
0.0 dB
(appears when
you set
[SURROUND] to
[YES] in the
[SIZE] setting.)
Set this between –15.0 dB and
+10.0 dB in 1.0 dB increments.
+10.0 dB in 1.0 dB increments.
[OFF]
The test tone is not emitted from the
speakers.
speakers.
[ON]
The test tone is emitted from each speaker
in sequence while adjusting level. When
you select one of the [SPEAKER SETUP]
items, the test tone is emitted from each
speaker in sequence.
in sequence while adjusting level. When
you select one of the [SPEAKER SETUP]
items, the test tone is emitted from each
speaker in sequence.