Sony DAV-IS10 Manual
masterpage:Left
specdef v20060111
filename[G:\F\FM\Sony\E\0628\DAVIS10_DMa\3276977111\3276977111DAVIS10\gb12adv.fm]
model name [DAV-IS10]
[3-276-977-11(1)]
84
US
1
Connect the calibration mic to the
ECM-AC2 jack on the rear of the control
unit, and set it up at the ear level using
a tripod, etc. (not supplied).
ECM-AC2 jack on the rear of the control
unit, and set it up at the ear level using
a tripod, etc. (not supplied).
The front of each speaker should face the
calibration mic, and there should be no
obstruction between the speakers and the
calibration mic.
calibration mic, and there should be no
obstruction between the speakers and the
calibration mic.
Note
• The ECM-AC2 jack is used for the supplied
calibration mic only. Do not connect other
microphones.
microphones.
2
Press FUNCTION repeatedly until
“DVD” appears in the front panel
display.
“DVD” appears in the front panel
display.
3
Press
DISPLAY when the system is
in stop mode.
The Control Menu display appears on the
TV screen.
TV screen.
4
Press
X/x to select
[AUTO
CALIBRATION], then press
.
5
Press .
The [AUTO CALIBRATION] display
appears.
appears.
6
Press
X/x to select [YES], then press
to start [AUTO CALIBRATION].
Be quiet during the measurement.
Note
• Avoid being in the measurement area and
making noise during the measurement (about 1
minute), to avoid measurement failure. During
the measurement, test signals are output from
the speakers.
minute), to avoid measurement failure. During
the measurement, test signals are output from
the speakers.
• The environment of the room in which the
system is installed may affect measurements.
DMPORT
Calibration mic
Rear of the control unit
To ECM-AC2 jack
START
T 0 : 0 3 : 0 4
3 ( 2 8 )
1 ( 4 4 )
DVD VIDEO
AUTO CALIBRATION
Connect calibration mic. Start
measurement?
measurement?
YES
AUTO CALIBRATION
NO
Measuring. Please wait a moment.