Sony HCD-HDX277WC Manual

masterpage:Left

specdef v20070110

filename[E:\SS2008\Models\DCR2WC-2W-4WF\3283032111\3283032111_DAV-HDX277WC-
279W-576WF\gb08ext.fm]

 model name [DAV-HDX277WC / HDX279W / HDX576WF]

 [3-283-032-11(1)]

Sound transmission is established as 
follows (example):

• To confirm the current ID, perform Steps 1 to 7 

above. When you pair the unit with the S-AIR sub 
unit (page 86), [(PAIRING)] appears beside ID on 
the display for selecting ID.

When sound transmission is established, 
the POWER / ON LINE indicator of the 
surround amplifier turns green.
For details of the POWER / ON LINE 
indicator, see “To check the transmission 
status” (page 42).

Refer to the operating instructions of the S-AIR 
receiver.

• It is easy to set the same ID for the unit and S-AIR sub 

unit to establish sound transmission. However, 
neighbors may also receive your system’s sound if 
IDs are the same, or you may receive the sound from 
neighbors. To prevent this, you can identify the unit 

with a specific S-AIR sub unit by performing the 
pairing operation (page 86).

You can enjoy the system’s sound by using the 
S-AIR receiver. The S-AIR receiver can be 
installed anywhere, regardless of the location of 
the unit, for enjoying the system’s sound in 
another room.

For details of the S-AIR receiver, refer to the 
operating instructions of the S-AIR receiver.

• To set the ID of the unit, see “To set the ID 

• To set the ID of the S-AIR receiver, refer 

to the operating instructions of the S-AIR 
receiver.

• When you are using another S-AIR sub unit, 

such as a surround amplifier, do not change the 
ID of the unit. Set the ID of the S-AIR receiver 
to the same ID as the unit.

• When you pair the unit and another S-AIR sub 

unit, such as a surround amplifier, by the pairing 
operation, you need to perform the pairing 
operation between the unit and the S-AIR 
receiver. For details, see “Identifying the unit 
with a specific S-AIR sub unit (Pairing 
operation)” (page 86).

The S-AIR mode appears in the front panel 
display. Each time you press S-AIR 
MODE, the S-AIR mode changes.
• “PARTY”: The S-AIR receiver outputs 

sound according to function set on the 
unit.

• “SEPARATE”: You can set the desired 

function for the S-AIR receiver while unit 
functions do not change.

This unit

S-AIR sub unit

ID A

S-AIR sub unit

S-AIR sub unit

ID A

ID A

ID B

ID B

Other S-AIR main 
unit