Sony HCD-HDX678WF Manual
92
US
• If an error message appears, follow the message,
then select [YES].
An error message appears when:
An error message appears when:
– the headphones are connected to the unit or
surround amplifier.
– the calibration mic is not connected.
– front speakers are not correctly connected.
– surround speakers are not correctly
connected.
– subwoofer is not connected.
– front and surround speakers are not correctly
connected.
10
Press
C/c to select [YES] or [NO], then
press .
x The measurement is OK.
Disconnect the calibration mic, then select
[YES]. The result is implemented.
[YES]. The result is implemented.
x The measurement is not OK.
Follow the message, then select [YES] to
retry.
retry.
Note
• While the Auto Calibration function works:
– do not turn off the power.
– do not press any button.
– do not change the volume.
– do not change the function.
– do not change the disc.
– do not insert or eject a disc.
– do not connect the headphones to the unit or
surround amplifier.
– do not disconnect the calibration mic.
Tip
• You can check the distance between the listening
position and each speaker. See page 74.
Controlling the TV with
the Supplied Remote
the Supplied Remote
By adjusting the remote signal, you can control
your TV with the supplied remote.
your TV with the supplied remote.
Note
• When you replace the batteries of the remote, the
code number may reset itself to the default (SONY)
setting. Reset the appropriate code number.
setting. Reset the appropriate code number.
Press and hold TV [/1 while entering your
TV’s manufacturer’s code (see the table)
using the number buttons. Then release TV
[/1.
TV’s manufacturer’s code (see the table)
using the number buttons. Then release TV
[/1.
If you successfully set the manufacturer’s code,
the TV button flashes twice slowly. If the setting
is unsuccessful, the TV button flashes five times
quickly.
the TV button flashes twice slowly. If the setting
is unsuccessful, the TV button flashes five times
quickly.
Code numbers of controllable TVs
If more than one code number is listed, try
entering them one at a time until you find the
code that works with your TV.
entering them one at a time until you find the
code that works with your TV.
TV
Preparing the remote for
controlling the TV
controlling the TV
Manufacturer
Code number
SONY
501 (default)
AIWA
501
AKAI
503
DAEWOO
503, 506, 515, 544
FISHER
508, 545
GE
503, 509, 510, 544
GOLDSTAR/LG
503, 515, 517, 544, 568
GRUNDIG
533
HITACHI
503, 514, 515, 517, 544, 557,
571
571
ITT
521, 522
JVC
516
LOEWE
515
MAGNAVOX
503, 515, 517, 518, 544, 566
MARANTZ
527
MITSUBISHI/MGA 503, 527, 544, 566, 568