Sony kv-27fs17 User Guide

Operating Instructions

Connect the coaxial cable from your TV antenna or cable service to 
the IN jack on your VCR.

Using a coaxial cable (not supplied), connect the OUT jack on your 
VCR to the VHF/UHF jack on the TV.

If your VCR is equipped with video outputs, you can get better picture 
quality by connecting Audio/Video cables (not supplied) from AUDIO 
and VIDEO OUT on your VCR to AUDIO/VIDEO IN on your TV.

To watch video programs from your VCR, tune your TV to channel 3 or 4 (as 
set on the rear of your VCR).

For optimum picture quality, use S VIDEO instead of the yellow Audio/ Video 
cable. S VIDEO does not provide sound; the audio cables must still be 
connected.

You can use the 

 button to switch between the VHF/UHF and VIDEO 

inputs.