Sony kv-34xbr910 Manual
100
O
ther
Inf
o
SETU
P
Oth
e
r I
n
fo
SETU
P
S
E
TU
P
SETU
P
General
Problem
Possible Remedies
How to reset TV to
factory settings
factory settings
❏
Turn on the TV. While holding down the
RESET
button on the remote
control, press the
POWER
button on the TV. (The TV will turn itself off, then
back on again.) Release the
RESET
button.
How to restore Video settings
to factory settings
to factory settings
❏
Press the
RESET
button on the remote control while in the Video Menu (see
page 78).
How to restore Audio
settings to factory settings
settings to factory settings
❏
Press the
RESET
button on the remote control while in the Audio Menu (see
page 80).
Cannot cycle through the
other video equipment
connected to the TV
other video equipment
connected to the TV
❏
Be sure the
Video Label
option is not set to
Skip
(see page 90).
Cannot operate Menu
❏
If a menu option appears in gray, this indicates that the TV is in a state in
which the menu option is not available.
which the menu option is not available.
Lost password
❏
In the password screen (see page 86), enter the following master password:
4357
. The master password clears your previous password; it cannot be
used to temporarily unblock channels.
TV makes “popping” sound
when turned on
when turned on
❏
This is a normal sound that results from the TV automatically degaussing
each time it is turned on.
each time it is turned on.
LED on front panel is lit
❏
The STAND BY LED (see page 13) blinks when the TV is turned on, then
shuts off when the picture is displayed. If the LED blinks continuously, this
may indicate the TV needs service.
shuts off when the picture is displayed. If the LED blinks continuously, this
may indicate the TV needs service.
❏
The TIMER LED (see page 13) indicates that the timer is set (page 91).
When the timer is set, this LED will remain lit even when the TV is turned
off.
When the timer is set, this LED will remain lit even when the TV is turned
off.
Digital cable box does not
work
work
❏
Be sure that you have not connected the digital cable box to the TV’s TO
CONVERTER jack. This jack is not compatible with digital cable boxes.
CONVERTER jack. This jack is not compatible with digital cable boxes.
❏
If you are connecting a VCR and digital cable box using a splitter, as
described on pages 26-27, you must use a special bi-directional splitter that
is designed to work with your digital cable box. Contact your cable
provider for details.
described on pages 26-27, you must use a special bi-directional splitter that
is designed to work with your digital cable box. Contact your cable
provider for details.
34XBR.book Page 100 Monday, May 19, 2003 8:44 AM