Sony KV-36FV27 User Guide

The remote control is preset to operate Sony-brand video equipment.

If you have video equipment other than Sony brand that you want to 
control with the TV’s remote control, use the following procedure to 
program the remote control. 

Check the list of “Manufacturer’s Codes” on page 53, and find 
the three-digit code number for the manufacturer of your 
component. (If more than one code number is listed, use the 
number listed first.)

Press 

CODE SET

.

Press the function button for the type of component you want to 
control with the TV’s remote control (VCR/DVD or SAT/
CABLE). 

Enter the three-digit manufacturer’s code number.

Press 

ENTER

.

To check if the code number works, aim the TV’s remote control 
at the component and press the green POWER button that 
corresponds with that component. If it responds, you are done. If 
not, try using another code listed for that manufacturer.

Beta, ED Beta VCRs

AV1

303

8 mm VCR

AV2

302

VHS VCR

AV3 

301

DVD Player

DVD 

751

✍

The equipment must have infrared (IR) remote capability in order to be used 
with the remote control.

✍

You must do step 4 within 10 seconds of step 3, or you must redo 
steps 2 and 3.

 

❑

If more than one code 
number is listed, try 
entering them one by 
one until you come to 
the correct code for 
your component.

❑

If you enter a new code 
number, the code 
number you 
previously entered at 
that setting is erased.

❑

In some cases, you may 
not be able to operate 
your component with 
the supplied remote 
control. In such cases, 
use the component’s 
own remote control 
unit.

❑

Whenever you remove 
the batteries to replace 
them, the code 
numbers may revert to 
the factory setting and 
must be reset.

z